Table of Contents
Advertisement
Main Menu
After installing your antenna system and DTB-9401F with appropriate connectors.
Plug in the AC main power and switch on the receiver.
Press the MENU key to bring up the main menu.
The following on screen display will appear:
The sub menu topics will be displayed from 1 to 4.
For the sub-menus 1, 2 and 3 you need the PIN Code.
1. Installation
This menu consists of 3 sub-menus:
Manual Scanning, Auto Scanning and Reset to Factory Default.
Select "Installation" in the main menu mode to
select the sub menu.
Enter the PIN Code.
If you have not entered your own PIN Code then the
PIN Code 0000 applies, which was set at the factory.
T
R
I
A
L
R
E
OPERATING THE RECEIVER
C
E
I
V
E
R
GB-17
Advertisement
Table of Contents
