Subscribe to Our Youtube Channel
Related Manuals for Savi ST-621
Summary of Contents for Savi ST-621
- Page 1 ...
- Page 2 EchoPoint, Savi, Savi SensorTag, Savi SmartChain, Savi SmartStart, Savi Technology, Savi’s Nested Visibility, SaviTag, SmartChain, the EchoPoint Logo, and the Savi Logo are trademarks or registered trademarks of Savi Technology, Inc. in the United States and other countries. Information in this manual is subject to change without notice and does not represent a commitment from the vendor.
- Page 3 Savi ST-621 License Plate Tag Description ....5 Features ..........5 Activating the Tag.
- Page 5 The Savi ST-621 License Plate Tag is a cost-effective, active RFID tag designed for various applications, including the tracking shipping containers and other conveyances. The Savi ST-621 License Plate Tag features a rugged form factor design, and has a replaceable battery with a typical life of five years.
- Page 6 The tag is shipped in sleep mode. You must remove and re-insert the battery to wake up the tag. After you re-insert the battery, you can initialize the tag. Remove the battery cap. Remove the battery.
- Page 7 Whenever a battery is inserted into a tag, the tag will emit 5 short beeps, one second apart. Then, the tag will emit 2 short beeps to indicate adequate battery voltage or 3 short beeps if a fresh battery is required. Replace the battery cap on the tag.
- Page 8 ÂÃÄÅÂ ÂÃÄÅÃÆÄ ÆÇÂÈÉÈÅÉ ÇÈÄÉÆÃÅÆ ÄÃ É! É" If the O-ring is not properly compressed by the cap, water leakage and damage may occur. ...
- Page 9 Savi Technology recommends that you mount the tag on a flat surface, with the tag aligned vertically. For best performance, place the tag as high as possible, safe from impact (for example, between the ribs of an ISO-type shipping container), and away from obstructions on the asset.
- Page 10 20 feet (6m) or higher Follow the instructions in the Savi SR-650 Fixed Reader Installation Guide to locate and position the Savi Fixed Reader for best performance.
- Page 11 There are two accessory mounting packages, which are sold separately: ÂÃÄÅ • Savi Mounting Kit STA-1260- , which includes PST ÂÃÄÅ • Savi Magnetic Mounting Kit STA-1261- You can also use the following alternative fastening methods: • Tie-wraps • Twine •...
- Page 12 The magnetic mount clamps directly onto the metal surface. The magnets hold the tag securely, but allow the tag and the magnetic bracket to be removed quickly. Once a mounting sleeve is fastened to an asset, you can leave it on the asset even after the tag is removed so the sleeve is available for future use with other compatible tags.
- Page 13 Asset tags and mounting sleeves have a security hole through which a nylon keeper band may be passed and tightened to secure the tag in place.
- Page 14 The tag is equipped with non-volatile memory, which means stored data is not lost when you replace the battery. Remove the battery cap. Remove the discharged battery from its compartment. For more information, see “Activating the Tag”...
- Page 15 Replace the battery cap on the tag. Whenever a battery is inserted into a tag, the tag will emit 5 beeps. Then, the tag will emit 2 short beeps to indicate adequate battery voltage or 3 short beeps if a fresh battery is required.
- Page 16 • Call 1-888-994-7284 (North America only) or 1-650-316-4760 between 5 a.m. and 5 p.m. Pacific time. When you contact Savi Global Support Services by telephone or email, have the following information available: • Contact information (company name, your name, email, and phone number) •...
- Page 17 " "# $"%!&' " "#$"(!&' " "# "%!& ) "% * # %& +, + -*. / ! * 2 342 5 (2 3%$2 6*! .
- Page 18 ! ! " #$$ %&...
Need help?
Do you have a question about the ST-621 and is the answer not in the manual?
Questions and answers