Wild tech WT-KLD User Manual page 10

a lint free cloth before installing.
• Pull the socket off the lamp. Do not pull the wires.
9.2 Beam angle
WT-WAV is best to be placed 5 meters from wall, and from this distance the light effect will cover the area of 4 m x
4 m.
WT-IFO is best to be placed 5 meters from wall, and from this distance the light effect will cover an area of 3.1 m x
3.1 m.
10. CA-16/ CA-416
CA-16
• Power input: DC 9V 500mA Min.
• 16-Channels controller with 16 buttons and indicators,very easy to use.
• The Wild Tech controller can perfectly work with CA-416 for best control of 16-channel power on/off.
• 16 channels DMX output.
• Dimension: 482 x 63 x 44 mm
• Weight: 1 kgs
CA-416
• Power supply: DC 9V 500mA Min.
• Bulb: 6.3A per channel(Max.).total 15A.
• 4-Channel switch pack with DMX input/output.
• Dip switches for DMX address setting.
• Main input: AC 120V/230V +/- 10% with Maximum 15A fuse holder.
• Output: 6.3A per channels for each socket.
• 4 LEDs indicate the outputs on both the front and back panels.
• 1 Power indicator on the back panel.
• Dimension: 480 x 100 x 88 mm
• Weight: 2.4 kgs
10.1 Install & Connection
1. Please refer to the diagram below for connecting CA-16, CA-416 and Wild Tech lights.
2. Set the CA-416 DMX address as 1,5,9,13 refer to the following dipswitch diagram.
3. Press the 1-16 buttons of CA-16 to control the lights power on/off.
Page 10