GE Cafe CSB48WSK Dimensions And Installation Information

CSB48WSK
GE Café Series 48" Built-In Side-By-Side Refrigerator
™
DIMENSIONS AND INSTALLATION INFORMATION
PRODUCT CLEARANCES
These refrigerators are equipped with a 2-position
door stop. The factory set 130° door swing can be
adjusted to 90° if clearance to adjacent cabinets or
walls is restricted.
130° DOOR SWING 90° DOOR SWING
B
A
D
MODELS A B
48" 13-7/16" 18-9/16"
Allow minimum clearances for Freezer door
(Dimension A) and Fresh Food door (Dimension B)
for a full 130° door swing and to allow for drawer
removal.
Four inch (4") minimum clearance is required when
door swing is adjusted to 90°. If the 90° door stop
position is used, drawer access is maintained, but
drawer removal is restricted.
For answers to your Monogram, GE Café
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center
22-3/8"
BEHIND
FRAME
C
D
C D
30" 4"
™
® Service, 800.626.2000.
STAINLESS STEEL WRAPPED REFRIGERATORS
Stainless Steel wrapped refrigerators have wrapped
doors and grille panels, and beveled edges. These
models are shipped ready for installation.
A B
Height to top of door (in.) A
Height to top of case (in.) B
Case depth without door (in.) C
Case depth less door handle (in.) D
Case depth with door handle (in.) E
Depth with fresh food door open 90˚ (in.) F
Width (in.) G
Width with door open 90˚ inc. handle (in.) H
Series, GE Profile ™ Series or
H
G
C
D E
84
83-1/2
22-3/8
25-3/4
28-1/4
52-3/8
48
53-3/4
Total volume and shelf Listed by
area are calculated by
Underwriters
the Association of Home
Laboratories
Appliance Manufacturers'
standards.
F
Specification Revised 3/16