Additional Settings For Wireless Client - Belkin F5D7230-4 User Manual

3. Configuring Local Computer to Access the Wireless Router

3.2 Additional Settings for Wireless Client

If you choose to access the router via a wireless client, also verify
the following:
1. Make sure your PC is equipped with 802.11g or 802.11b
wireless adapter and has appropriate WLAN card driver/utility
and TCP/IP installed.
2. Set the wireless adapter to use appropriate TCP/IP settings as
described in previous section.
3. Launch the wireless adapter's provided utility and verify that
your wireless client is configured with these settings:
•
Operation Mode: Infrastructure
•
SSID: wireless
•
Authentication: Open
•
WEP Mode: Disabled
15