Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Clemas & Co VHC200
Summary of Contents for Clemas & Co VHC200
- Page 1 VHC200 AIRPOWERED VACUUM CLEANER OPERATOR MANUAL Clemas & Co. Unit 5 Ashchurch Business Centre, Alexandra Way, Tewkesbury, Gloucestershire, GL20 8NB. Tel: 01684 850777 Fax: 01684 850707 Email: info@clemas.co.uk Web: www.clemas.co.uk...
-
Page 2: Table Of Contents
VHC200 Translation of the original instructions Table of contents Instructions for use ......................2 Operator’s safety ..........................2 General information for using the vacuum cleaner ................2 Proper uses ............................. 2 Improper Use ........................... 3 Versions and variations ........................3 EC Declaration of conformity ......................3 General recommendations ...................... -
Page 3: Instructions For Use
VHC200 Instructions for use Read the operating instructions and comply with the important safety recommendations identiÞ ed by the word WARNING! Operator’s safety General information for using the vacuum cleaner WARNING! Use the vacuum cleaner in accordance with the laws in force Before starting the vacuum cleaner, it is in the country where it is used. -
Page 4: Improper Use
VHC200 Improper Use Versions and variations Versions WARNING! The following use of the device is strictly forbidden: Optional Outdoors in case of atmospheric precipitation. When not placed on horizontal levelled grounds. LIQUIDS When the Þ ltering unit is not installed. -
Page 5: Vacuum Cleaner Description
VHC200 Vacuum cleaner description Vacuum Cleaner Parts and Labels Optional kits Figure 1 Please contact the manufacturer’s sales network for information on optionals. IdentiÞ cation plate which includes: Model Code, Technical SpeciÞ cations (see table on page Instructions for installing the optional are included in the 7), Serial no. -
Page 6: Unpacking, Moving, Use And Storage
VHC200 Unpacking, moving, use and storage Operate on ß at, horizontal surfaces. The load-bearing capacity of the surface the vacuum cleaner is placed on must be suitable for bearing its weight). Setting to work - connection to the pneumatic system... -
Page 7: Wet And Dry Applications
VHC200 Wet and dry applications Maintenance and repairs [ NOTE ] WARNING! The supplied Þ lters and the bag (if applicable) must be Disconnect the vacuum cleaner from its power installed correctly. source before cleaning, servicing, replacing parts or converting it to obtain another version/variant. -
Page 8: Technical Speciþ Cations
VHC200 Technical speciÞ cations VHC200 Parameter Units 50 L 100 L Air consumption NL/min 2650 Air pressure required Max vacuum Maximum air ß ow rate (without hose and reductions) L/min’ 5600 Maximum air ß ow rate (with hose, length: 3 m, diameter: 70 mm) L/min’... -
Page 9: Inspections Prior To Starting
VHC200 Inspections prior to starting Primary Þ lter shaker Depending on the quantity of dust cleaned up, shake the main Figure 5 Þ lter by means of the knob “3” (Fig. 4). Inlet WARNING! Prior to starting, check that: Stop the vacuum cleaner before using the Þ lter shaker. -
Page 10: At The End Of A Cleaning Session
VHC200 At the end of a cleaning session Primary and absolute Þ lter disassembly and replacement Stop the vacuum cleaner using tap (1 - Fig. 4) and disconnect the hose from the pneumatic system. Empty the container as described in the “Emptying the WARNING! container”... -
Page 11: Absolute Þ Lter Assembly Or Replacement
VHC200 Absolute Þ lter assembly or replacement Tightness inspection Hoses check WARNING! Make sure the connecting hoses (Fig. 9) are in a good Do not use the absolute Þ lter again after having condition and correctly Þ xed. removed it from the vacuum cleaner. -
Page 12: Recommended Spare Parts
VHC200 Recommended spare parts The following is a list of spare parts that should be kept ready at hand in order to speed up maintenance operations. Refer to the manufacturer’s spare parts catalogue when ordering spare parts. Model Description Standard Class M Þ... -
Page 13: Troubleshooting
VHC200 Troubleshooting Problem Cause Remedy Shake the Þ lter. Clogged primary Þ lter Replace it if necessary The vacuum cleaner suddenly stops Clogged vacuum hose Check and clean the air intake Increase air supply pressure. Check the pressure InsufÞ cient airß ow supplied by the pneumatic network is sufÞ... - Page 14 VHC200 13 A 07AJ814 3000 W Kg 71 Ref.No: 4010300258 50/60 Hz ME77 09/2011 C385...
- Page 15 VHC200 C385 09/2011...
- Page 16 VHC200 09/2011 C385...
- Page 17 VHC200 C385 09/2011...
- Page 18 VHC200 09/2011 C385...
Need help?
Do you have a question about the VHC200 and is the answer not in the manual?
Questions and answers