One App + One Hub + All Your Things
Creating a safer, smarter home has never been easier. Start with the SmartTh-
SmartThings
ings app and Hub, add your favorite products, and control them from another
Hub
room or another country.
A safer,
smarter home
starts with
me!
App
Hub
The free SmartThings
The Hub sends
app lets you get
commands from
important notifications
the free app
Quick-Start Guide
about what's
to your connected
happening, control
things, and sends
things in every room,
important alerts from
and run your home
your things to your
from your phone.
smartphone.
Meet Your SmartThings Hub
SmartThings lets you easily control, monitor, and secure your home from
anywhere in the world. At the center of it all is the SmartThings Hub.
Things
Add devices from
SmartThings'
family of sensors or
hundreds of other
connected products
to create a smart
home that fits your
lifestyle.
The Brain of Your Smart Home
So Easy Anyone Can Do It
Like a live-in translator, the Hub wirelessly connects all of the different sensors
As with all SmartThings devices, the Hub requires no wiring or messy installa-
around your home so that they can send important information to your
tion–just a simple setup that anyone can do.
smartphone, and to each other.
Simply plug in the included Ethernet cable from your Hub to your Internet
The SmartThings Hub connects to your Internet router via the included
router, attach the power cord to the wall, and then use the free SmartThings
Ethernet cable. The Hub has a ZigBee, Z-Wave, and Bluetooth radio, and also
app to start connecting your devices. Easy peasy.
supports IP-accessible devices–providing customers with the widest range of
supported devices of any smart home platform. In addition, the Hub contains
replaceable batteries that allow it to continue operating in the event of a power
outage.
For a list of products that have been tested and verified as compatible,
please visit
http://www.smartthings.com/product/works-with-smartthings/.
Power
TM
Simple Setup
The SmartThings Hub works best if installed in a central location to where your
SmartThings will be connected. The recommended separation distance from
the user for this equipment is 7.6 inches (20 cm).
• Connect your SmartThings Hub to your Internet router using the
included Ethernet cable.
• Plug in the power adapter to an outlet and attach the power connec-
tor to the back of the Hub.
• Continue setting up your Hub by going to www.SmartTh-
ings.com/start on your smartphone and following the on-screen
instructions.
Front
Power Adapter
Status Light
Network
Connector
Back
Reset
USB
Network
Power Connector
(ethernet)
Battery Backup Installation
Disconnect the network cable and power adapter or any other connected
peripherals before installing batteries (4 x AA):
• Slide bottom cover off.
• Insert 4 AA batteries.
• Slide bottom cover on till it snaps in to place.
NOTE: Hub does not recharge batteries.
1
2
AC Plug
3
4
Need help?
Do you have a question about the STH-ETH-250 and is the answer not in the manual?
Questions and answers