Configuration Of The Output - Johansson Colosseum 8500 User Manual

CONFIGURATION OF THE OUTPUT

MUX SETTINGS
Navigate to the
The 4 multiplexes are adjacent, and only the frequency of the first mux needs
to be configured, the others will automatically be set according to this
frequency and the bandwidth.
NOTES
Check if the MUX frequencies of the different modules do not overlap!

The TSID must have a different value, put in the values manually!

The LCN numbers can also be changed manually.

Always press APPLY if you want to save the new settings!

16
to configure the COFDM output parameters.