Digiplex EVO User Quick Reference Manual

AC LIGHT
ON = AC Power
OFF = Power failure

STATUS LIGHT

When green:
ON = Zones closed
OFF = Zone(s) open
Flash = Exit delay
When red:
ON = Area(s) armed
OFF = Area(s) disarmed
Flash = Alarm
1. Enter your [
ACCESS CODE
To Regular Arm: Press the [
(Arms entire area when all zones are closed).
To Force Arm:
(Arms entire area without waiting for all zones to close)
To Stay Arm:
(Arms area's perimeter only, which allows you to remain in the protected area)
To Instant Arm: Press the [5] key
(Stay arms the area but an alarm will occur instantly any zones open)
2. Select the desired area or press the [0] key for all areas
User Quick Reference Guide
LCD Keypad
[ ] = Erases current data entry or reverts to the preceding step
CLEAR
[ ] = Saves current data and exits current menu
ENTER
HOW TO ARM
] and then:
] key
ARM
Press the [
FORCE
Press the [
STAY
] key
] key
The LCD will guide you
with detailed messages.
Use the arrow keys to
scroll the menu or choices.
Press the corresponding
one-touch button for 2
seconds to perform an
action without entering
your Access Code.