Samsung SP-A400B Owner's Instructions Manual page 29

Film Mode Using this function, you can set the display mode optimized for playing movies.
▶ Film Mode is only supported for [Video], [S-Video] and [Component].
1) Off
2) On
Screen
Adjustment
Install To tailor the picture to the installation location, you can invert the projected images
vertically/horizontally.
1) Front-Floor : Normal Image
2) Front-Ceiling : Horizontally Reversed Image
3) Rear-Floor : Vertically Reversed Image
4) Rear-Ceiling : Horizontal/Vertical Reversed Image
Light Setting Used to set the image brightness by adjusting the amount of light generated by the
lamp.
1) Theater : Using this function, you can adjust the light level of the lamp so that you
can comfortably watch pictures on the screen even when watching under dark
conditions. It also lowers power consumption and extends the life of the lamp.
2) Bright : Used to enhance the brightness in relatively bright ambient light. Since
this mode increases the light level of the lamp, you may experience more noise
which is produced when the projector is cooled down.
V-Keystone If video scences are distorted or tilted, you can compensate for this using the vertical
Keystone function.
Test Pattern Generated by the projector itself. Utilized as standard to optimize the installation of the
projector.
1) Crosshatch : You can check whether the picture is distorted or not.
* Click the Play( )/Stop( ) button in the table below to view the video file.
Description
| Input | Picture | Setup | Option
Play/Stop
Theater
Bright
Crosshatch
|