Samsung SP-A400B Owner's Instructions Manual page 24

A400b a series projector

Hide thumbs Also See for SP-A400B:

Connect [PC IN] port on the rear side of the projector to the monitor output port of the PC using a PC video cable.

When connections are all completed, connect both power cords of the projector and the PC.

This product supports plug and play, therefore you do not need to install a driver on your PC.

Using the Projector

Turn on the projector and press the [PC] button to select <PC>.

If PC Mode is not available, check PC video cable is in place.

Turn on the PC and

set the PC Environment

Adjust the

screen.(Auto

Adjustment)

Sound comes out from PC speakers.

Connecting Video Devices (Monitor, TV, etc.)

- When using the D-sub (analog) output through another video device (monitor, TV, etc.).

Connect the MONITOR OUT terminal of the projector and the D-sub terminal of the video device using a

D-sub cable.

After connecting them, turn on your projector and the video device (monitor, TV, etc.).

when necessary.