Table of Contents
Advertisement
•
Using the Schedule function
Using the Schedule function, you can manage your projectors more efficiently.
If you select List>Schedule, the following window appears.
The screen has four buttons:
• New : Creates a projector to make a Schedule for.
• Delete : Deletes the Schedule for a selected projector.
• Delete All : Deletes the Schedule for all of the projectors.
• Edit : Edits the Schedule for a selected projector.
•
Registering a New Schedule
To register a new schedule, follow these steps:
1. Press the New button. The New Schedule screen appears.
2. Select the projectors to apply the new schedule to from the Select Projectors field. When you select a projector, a
check mark appears in the check box to its left.
3. Set the new schedule Title, Repeat, Time, and Work, and enter a Description of the Schedule. Explanations for each
of these terms is below.
-Title : Sets the name of a Schedule
-Repeat : Sets the schedule repetition (Once- Executes only once, Every - Specifies a repetition date)
-Time : Determines the time at which a schedule will be executed
-Work : Sets Source switch or Power On/Off
-Description : Shows a detailed description of a Schedule
4. After you have entered all the information, press ADD.
You can view the registration history of a Schedule. You can also view the status of a Schedule. The Status codes
are below:
-Complete: Schedule complete.
Using
3-6
Advertisement
Table of Contents
