Table of Contents
Advertisement
MENU
Network
Reset
3-5-4. Option
MENU
Language
Menu Option
Sound
Using
By connecting a LAN cable between the PC and projector, you can use the following supplementary
functions.
On your PC, you can check the projector's conditions (lifespan of the lamp, operation error,
temperature) and remotely control the projector's power On/Off, brightness, and sound On/Off .
•
<Network> : <On> - <Off>
•
<IP Setting>
<Automatic> : Automatically allots the IP address, Subnet mask and Gateway.
<Manual> : Allows you to manually enter the IP address, Subnet mask and Gateway manually.
•
<Server IP Setting> : Allows you to enter the server PC's IP address.
Remote Control : Navigate between options using
buttons.
To use the network function, <Network> must be set to <On>.
If the network connection fails, enter the IP address of the server PC under <Server IP Setting>.
Using this function, you can reset various settings to the factory default settings.
•
<Factory Default> : Changes the settings to the factory defaults.
•
<Reset Filter Time> : Resets the filter time.
You can select the language used for the menu screen.
•
<Position> : You can move Menu Position up/down/left/right.
•
<Transparency> : You can set the translucency of the menu.
•
<High>-<Medium>-<Low>-<Opaque>
•
<Display Time> : You can set the display time of the menu.
•
<5 sec>-<10 sec>-<30 sec>-<60 sec>-<90 sec>-<120 sec>-<Stay On>
Adjusts the right and left audio balance and equalizer of the 3W stereo speaker embedded in the pro-
jector.
•
<Balance>-<100Hz>-<300Hz>-<1kHz>-<3kHz>-<10kHz>
DESCRIPTION
/
buttons. Input the values using
DESCRIPTION
/
3-5
Advertisement
Table of Contents
