Checking The Product Information; Checking The Signal Information - Samsung SP50L6HD Owner's Instructions Manual

Checking the Product Information

You can view your product information. For service or repair,
please contact a Samsung approved dealer.
1
Press the D.MENU button.
Result: The DTV menu is displayed.
Press the ... or † button to select System.
2
Result: The System menu is displayed.
3
Press the ENTER/OK (
Result: The Product Information is selected.
4
Press the ENTER/OK (
Result: The product information menu is displayed.
- Software Version
- Firmware Version
- Hardware Version
5
Press the D.MENU button to return to the previous menu or
press the EXIT button to return to normal viewing.

Checking the Signal Information

You can get information about the signal status.
1
Press the D.MENU button.
Result: The DTV menu is displayed.
Press the ... or † button to select System.
2
Result: The System menu is displayed.
3
Press the ENTER/OK (
Press the ... or † button to select Signal Information.
4
Press the ENTER/OK (
Result: The technical information for signal status is
displayed.
- Service
- Service ID
- Multiplex
- Network
- Bit Error Level
- Signal Strength
5
Press the D.MENU button to return to the previous menu or
press the EXIT button to return to normal viewing.
) button.
) button again.
) button.
) button.
System
Product Information √
Signal Information √
Software Upgrade
√
Common Interface
Reset
√
Move Enter Return
Product Information
Software Version : T_BORDDUKO_0003
Firmware Version : T_BORDDUK7_1000
Hardware Version : v0.90a
Return
System
Product Information √
Signal Information √
Software Upgrade
√
Common Interface
Reset
√
Move Enter Return
Signal Information
Service : Test Card 'M' v2.0
Service ID : 1014, running
Multiplex : 65C (TSID 1001,ONID 233a)
Network : Test Card 'M'.. (ID 3Off)
Bit error Level : 0
Signal Strength : 97
Return
English - 63