Cambridge Audio AR30 V2 Service Manual page 4

DAB and FM bands on DR30.
8. Info
Changes the display mode to allow the user to view different information. In tuner mode, data
varies depending on the type of broadcast, and signal quality. When in a non-tuner mode,
pressing the Info button will briefly display the clock time, before returning to show the current
source.
9. Select/Mode
In tuner mode, pressing once will toggle the tuning mode between preset and manual.
In presets mode, the unit will automatically tune to the first available preset in the band.
Alternatively, you may press and hold to store the current station in the preset bank. Use the
keys or rotate the Volume control to select the preset location where you wish to store the
preset, and press Select/Mode again to confirm.
10. MP3 Input
This source input allows you to connect a portable audio device such as an MP3 player directly
into the front of the unit using the 3.5mm stereo-jack (labelled 'MP3 In'). Select the MP3 input
source using the Source button or direct MP3 button on the remote to listen to your portable audio
device.
Note: Plugging a source into the front panel MP3 input overrides the DD30 docking station (which
is also selected by selecting the MP3 source via the remote control or front panel Source button).
Simply remove the jack from the front panel socket to automatically re-enable the DD30 docking
station as the MP3 source.
There is no need to unplug the DD30 docking station whilst using the front panel MP3 input and it
will continue to charge a docked iPod as usual.
11. Volume control
Use to increase or decrease the level of the sound from the outputs of the unit. This controls the
volume level of the loudspeakers, subwoofer and headphones. It does not affect the 'Rec Out'
output.
It is also used to change the value of the selected settings in audio setup and advanced setup
menus.
Press once to enter the audio setup menu. Press and hold to enter the advanced setup menu.
See later section in this manual.
Front panel controls
4