Table of Contents
Advertisement
Connecting a Cable Converter Box
This connection allows you to watch cable and premium channels. You should keep your TV
selected to "ANT 1 IN" so that you can use the TV features. When viewing premium channels,
select "ANT 2 IN" and tune the TV to channel 3 or 4 (whichever channel is vacant in your area),
then use the converter box to change channels. You will need two coaxial cables.
From
Cable
Connecting a Cable Converter Box and a VCR
This connection allows you to watch and record basic and premium cable channels, as well as
watch videotapes. You should keep your TV selected to "ANT 1 IN" so that you can use the TV's
features. When viewing premium channels or recording with the VCR, select "ANT 2 IN"
(whichever channel is vacant in your area), then use the converter box to change channels.
TV Rear Panel
From
Cable
Stereo VCR
NOTES
• When you use a converter box with
your TV, there may be features that you
can not program using the remote
control, such as programming your
favorite channels and blocking
channels.
• The output from "ANT 1 OUT" is
available when select "Ant.2" in the
"Antenna" channel menu.
Caution: If you want to record one channel
while watching another channel, a splitter
(not included) must be added between the
cable and "ANT 1 IN". One output of the
splitter goes to "ANT 1 OUT" and the
second output is connected to IN on the
cable converter box.
If you have a mono VCR, connect L/Mono
to VCR Audio OUT using only one audio
cable.
If you have a S-VHS VCR, use the S-video
connections and remove the video cable.
Do not connect the video cable and the
S-video cable to video1 simultaneously.
When you use a converter box with your
TV there may be features that you can not
program using the remote control, such as
programming your favorite channels and
blocking channels.
English - 19
Advertisement
Table of Contents
