HIKVISION DS-PD1-WL-W User Manual

Wireless Water Leak Detector
User Manual
!
The equipment is not suitable for
likely to be present.

Appearance

Indicator
/Key
Disassembling

Probe Interface

Groove

Hang Hole

Wireless water leak detector can be secured
reaches the terminal of the probe, the red
indiactor will keep solid for 3s, and the
detector will send alarm signal to the
controller.
Due to the product shape and dimension,
the name and address of the importer/manufacturer
are printed on the package

Local Registration

Security
within 50cm
Control
Panel

Registration

Make the security control panel enter the
add the detector accroding to the audio
prompt.

Unregistration

Make the security control panel enter the
delete the detector accroding to the audio
prompt.
Note: The distance between the security control
panel and the detector should be less than 50 cm.

Formatting

Powered the detector off.
Hold the reset button after 3s, and power the
device on at the same time.
After 5s, the green indicator will flash 3 times,
which means the formatting is completed.
Registration via APP
1 Log in to the APP Store and input "Hik-Connect"
to search the mobile client.
Download and install Hik-Connect to your phone.
2
3
4 Power on the security control panel.
Log in the Hik-Connect and tap the icon "+" at
5
the upper-right coner of the Hik-Connect page to
add the security control panel. You can scan the
QR code on the device rear panel or on the
package box, or input the device serial No.
manually to add the device when the device is in
6
arming status icon on the right of the security
7
peripherals.