Memorizing The Channels - Samsung HL-R4266W Owner's Instructions Manual

Operation

Memorizing the Channels

Your TV can memorize and store all of the available channels for both "off-air" (antenna) and cable
channels. After the available channels are memorized, use the CH
through the channels. This eliminates the need to change channels by entering the channel digits.
There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels
(automatic) and adding and deleting channels (manual).
English - 32
Selecting the Video Signal Source
Before your television can begin memorizing the available channels,
you must specify the type of signal source that is connected to the TV
(i.e., an antenna or cable system).
1
Press the MENU button.
Press the ... or † button to
select "Channel", then press
the ENTER button.
2
Press the ENTER button to
select "Antenna".
Press the ... or † button to
select "Air" or "Cable", then
press the ENTER button.
3
Press the ... or † button to
select "Auto Program", then
press the ENTER button.
NOTE
• All available DTV and analog channels are automatically stored
in memory.
and CH buttons to scan
Channel
Input Antenna : Air
Auto Program
Picture
Add/Delete
Favorite Channels
Sound
Name
Channel
Fine Tune
Signal Strength
Setup
LNA : On
Guide
Move Enter
Channel
Input Antenna : Cable
Air
Auto Program Cable
Picture
Add/Delete
Favorite Channels
Sound
Name
Channel
Fine Tune
Signal Strength
Setup
LNA : Off
Guide
Move Enter
Channel
Input Antenna : Air
Auto Program
Picture
Add/Delete
Favorite Channels
Sound
Name
Channel
Fine Tune
Signal Strength
Setup
LNA : On
Guide
Move Enter
√
√
√
√
√
√
√
√
Return
Return
√
√
√
√
√
√
√
√
Return