Richter Core+ User Manual page 7

CORE+ DIGITAL RADIO
e) Volume
Press CHANNEL button to increase or decrease the wake up Volume
level and press SELECT to confirm.
i) After completing the settings, press INFO/MENU button back to the
System Settings. Press CHANNEL button to choose Alarm, and press
SELECT button to enter.
ii) Now you can see the status of the Alarm 1 and Alarm 2. It shows
On or Off, and time.
During the process of setting the alarm, you can press INFO/MENU
button once to exit to System Settings without Saving.
f) Alarm ringing
When the alarm is ringing, it will enter standby mode if the sound source
you selected was Buzzer. If the sound source you selected was DAB or
FM station, the radio will go to that station automatically.
The volume will increase gradually to reach the volume level you set.
g) Stop the Alarm
To stop the alarm press the POWER button.
The screen will show Alarm off. The radio will go to standby mode.
h) Snooze function
You can also press SELECT button to Snooze function. The alarm will
temporarily stop, exit to standby mode and go snooze function.
It will show the snooze time. You can set the snooze time to 5 or 10
minutes by pressing SELECT button continuously until you see the
correct time.
Then the radio will temporary stop and exit to standby mode. When the
radio starts playing again, you can press the SELECT button to stop it.
5.13 Set Time/Date
a) Press and hold the INFO/MENU button to enter the menu, press
CHANNEL button to choose System Settings and press SELECT
b) Press CHANNEL button to choose Time/Date and press SELECT
c) Now you can see a list of selections, press CHANNEL button to
choose and press SELECT to enter the change of a particular option:
12
5.13.1 Set time/date
a) Press SELECT and the Day part will flash.
b) Press CHANNEL button to set the day and press SELECT to confirm.
c) The Month part will now flash. Press CHANNEL button to set the
month and press SELECT to confirm.
d) The Year part will flash. Press CHANNEL button to set the year and
press SELECT to confirm.
e) The Hour part will flash. Press CHANNEL button to set the hour and
press SELECT to confirm.
f) The Minute part will flash. Press CHANNEL button to set the minute
and press SELECT to confirm.
5.13.2 Auto Update
Press the CHANNEL button to choose the time update source <from
any> / <from Digital Radio> / <from FM> / <No update>, and press
SELECT to confirm.
5.13.3 Set 12 / 24 Hour
Press CHANNEL button to choose <12 Hour> / <24 Hour> for time
display and press SELECT to confirm.
5.13.4 Set date format
Press CHANNEL button to select <DD-MMYYYY> / <MM-DD-YYYY>
for date display format, and press SELECT to confirm.
5.14 Set Backlight
This radio display has a backlight with adjustable timeout (this is the time
delay, in seconds, after which the display switches off).
a) Press and hold the INFO/MENU button to enter the menu. Press
CHANNEL button to choose System Settings and press SELECT
b) Press CHANNEL button to choose Backlight and press SELECT
c) Now you can see a list of selections, press CHANNEL button to
choose and press SELECT to confirm the change.
MODEL: RR26
13