Richter Core+ User Manual page 5

CORE+ DIGITAL RADIO
5. INFO/MENU BUTTON
5.1 Changing the DAB or FM Display Information
Press the INFO/MENU button repeatedly to display information about
the station you are on.
5.2 Station List (DAB)
a) Press and hold the INFO/MENU button to enter the menu.
b) Press CHANNEL button to choose Station List and press SELECT.
c) Press CHANNEL button to choose the station you want to listen to
and press SELECT.
5.3 Full Scan (DAB)
a) Press and hold the INFO/MENU button to enter the menu and press
CHANNEL button to choose Full Scan and press SELECT to confirm.
Note: If no station is found, it shows No Station found in the display.
For Better reception, extent the antenna or repeat the full scan again in
another location.
5.4 Scan Setting (FM)
By default, FM scans stop at any available station (All stations). This
may result in poor quality audio from weak stations .The scan quality can
be improved selecting Strong stations only.
a) Press and hold the INFO/MENU button to enter the menu.
b) Press CHANNEL button to choose Scan Setting and press SELECT.
c) Press CHANNEL button to select option and press SELECT to
confirm the change.
5.5 Audio Setting (FM)
By default, all stereo stations are reproduced in stereo. For weak
stations, this may result in poor quality audio. The audio quality can be
improved using mono.
a) Press and hold the INFO/MENU button to enter the menu.
b) Press CHANNEL button to choose Audio Setting and press SELECT.
c) Press CHANNEL button to select option and press SELECT to
confirm the change.
8
5.6 Manual Tune (DAB)
As well as the normal method of scanning, you can also manually tune
to a particular channel or frequency. This can be useful for adjusting your
antenna to achieve the best possible reception and scanning a particular
channel to update the station list.
a) Press and hold the INFO/MENU button to enter the menu.
b) Press CHANNEL button to choose Manual Tune and press SELECT.
c) Press CHANNEL button to select and press SELECT to confirm the
change.
5.7 Prune Invalid (remove stations that are listed but unavailable)
This removes all invalid stations indicated in the station list with 'a' '?' in
front of the station name.
a) Press and hold the INFO/MENU button to enter the menu.
b) Press CHANNEL button to choose Prune Invalid and press SELECT
c) Press CHANNEL button to select yes and press SELECT to confirm.
5.8 DRC (Dynamic Range Control)
This function reduces the difference between the loudest and
Quietest audio being broadcast. Effectively, this makes quiet sounds
comparatively louder, and loud sounds comparatively quieter. Options:
off (default) / low / high
Note: DRC is not broadcast or enabled in Australia.
a) Press and hold the INFO/MENU button to enter the menu.
b) Press CHANNEL button to choose DRC and press SELECT
c) Press CHANNEL button to select the option and press SELECT to
confirm the change.
MODEL: RR26
9