Table of Contents
Advertisement
Setting the Password
Set a password so that unauthorized users cannot use the product or change the set-
tings.
You can set your password when starting the system or confi guring the system setup.
Caution
● If you forgot your password, you cannot use the system. Write the password down and
keep it in a safe place.
● After setting the password, you must boot the system with a USB keyboard connected.
Set Supervisor Password
Set a password to prevent product access by unauthorized users. By default, no pass-
word is set. If an unauthorized user modifi es the CMOS setup and sets a new password
when the computer is turned on, this prevents the original user from accessing the
product.
Phoenix SecureCore(tm) Setup Utility
Main
Advanced
Phoenix SecureCore(tm) Setup Utility
Main
Advanced
Security
Supervisor Password Is:
Supervisor Password Is:
Clear
Set Supervisor Password
Set Supervisor Password
[
Enter
User Password Is:
Clear
User Password Is:
Set User Password
[Enter]
Set User Password
Password on boot:
[Disabled]
Password on boot:
F1
Help
Select Item
-/+
ESC
Exit
Select Menu
Enter
F1
Help
Select Item
ESC
Exit
Select Menu
Security
Boot
Boot
Exit
Clear
Item Specific Help
[
Enter
]
]
Supervisor Password
Clear
controls access to the
[Enter]
setup utility.
[Disabled]
Change Values
F9
Setup Defaults
Select
Sub-Menu
F10
Save and Exit
-/+
Change Values
Enter
Select
Exit
1. Activate the system setup window and
use the arrow keys to move to the
Item Specific Help
Security section.
Supervisor Password
2. In the window shown on the left, use
controls access to the
setup utility.
the arrow keys to select [Set Supervi-
sor Password] and press the [Enter]
key.
3. When the message shown on the left
appears, enter a password and press
the [Enter] key. The password can be
F9
Setup Defaults
up to 8 alphanumeric characters (A - Z,
Sub-Menu
F10
Save and Exit
0 - 9).
4. When the message shown on the left
appears, press the [Enter] key.
5. Press the [F10] key to save the
changes.
6. When the message shown on the left
appears, select [Yes] and press the
[Enter] key. Then, the product restarts.
23
Advertisement
Table of Contents
