Ratoc Systems REX-FDCF User Manual

1.
Introduction
Thank you for purchasing FDD emulated CF Card Reader(REX-FDCF).
Please read through these operating manual so you will know to setup REX-FDCF.
2.
Mounting instruction
-Connect FDD interface cable(3) and FDD power cable(1) to REX-FDCF. (*Refer to section 4-1)
-REX-FDCF is recognized as PC/AT Std.FDD drive automatically. You do not need to install driver software.
3.
Specifications
3-1. Supported CF Media
-CF Media compliant with Compact Flash Specification Revision4.1
-TypeI or TypeII CF media.
-Media capacity over 4MBytes.
(Media capacity recognized from OS is same size as selected FDD format style)
3-2. General Specification
Supply voltage
Output voltage
Operation temperature
Operation humidity
Storage temperature
Storage humidity
Consumption current
Weight
4.
Part Names
4-1. Rear part
①
②
4-2. Front part
D
⑤
④
H
CompactFlash
Read/Write
Read Only
REX-FDCF
User's Manual
+5V +/-10%
+3.3V +/-5%
0 deg - 55deg
20% - 80%
0 deg - 65deg
20% - 80%
119mA idle state/169mA
262g
③
W
⑥
⑦
REX-FDCF
Apl.2011 Rev.1.0
provided from FDD power connector.
provide to CF media from CF connector pin.
non-condensing
non-condensing
non-condensing
non-condensing
operation state(supply current to CF included)
include chassis weight
①
Power connector
②
Setting DIP-SW (Refer to section 4-4)
③
FDD Interface connector (Refer to section 4-5)
④
CF media write-protect SW
If the write-protect SW is turned to the "Read Only",
it returns the state "write-protect floppy media is inserted" to the host PC.
⑤
CF media slot
⑥
CF media eject button
⑦
CF media access LED
Outline dimension
Width 4. 00 in(10 1. 50mm )
Depth
4. 43in( 112 .50 mm)
Height 0 .9 9in( 25. 30 mm)
- 1 -
Part Names