Samsung SCX-5x30 User Manual page 80

Message Meaning
Global Server When there is a
Auth Failed authentication fail
while connecting to
the global server this
message displays.
Global Server This error message
Comm. Error displays when there
is a communication
error between the
global server and
the device.
Global Server Not When no global
Configured server is configured,
this message
displays.
Global Server Not When the device is
Found unable to find the
Global server.
Group Not You have tried to
Available select a group
location number
where only a single
location number can
be used, such as
when adding
locations for a
Multiple Send
operation.
[Incompatible] The machine has
received a fax from
which is registered
as a junk fax..
Invalid Server The server address
Address you have entered is
invalid.
Line Busy The receiving fax
machine did not
answer or the line is
already engaged.
[Line Error] Your machine
cannot connect with
the receiving fax
machine or has lost
contact because of a
problem with the
phone line.
Suggested solutions
Check the authentication
account and password.
• Try again.
• Contact a LDAP Server
administrator.
Check the LDAP server
configuration settings.
Check the LDAP server
address, The LDAP
server address is
incorrect, or the server
has failed.
Use a speed dial number
or dial a number
manually using the
number keypad.
The received fax data will
be deleted.
Reconfirm junk fax setup,
see page 10.2.
Enter the correct server
address.
Try again after a few
minutes.
Try again. If the problem
persists, wait an hour or
so for the line to clear
and try again.
Or, turn the ECM mode
on. See page 10.1.
14.8
Message Meaning
Low Heat Error There is a problem
Cycle Power in the fuser unit.
LSU Motor Error A problem has
Cycle Power occurred in the LSU
(Laser Scanning
Unit).
LSU Hsync Error A problem has
Cycle Power occurred in the LSU
(Laser Scanning
Unit).
Main Motor There is a problem
Locked in the main motor.
Mail Exceeds The mail size is
larger than the
Server Support
supported size by
SMTP server.
Memory Full The memory is full.
MP Tray There is no paper in
the multi-purpose
Paper Empty
tray.
Network Error There is a problem
with the network.
[No Answer] The receiving fax
machine has not
answered after
several redial
attempts.
Not Assigned The speed button or
speed dial number
you tried to use has
no number or email
address assigned to
it.
[No Paper] The paper in the tray
Add Paper has run out.
One Page is Single page data
exceeds the
Too Large
configured mail size.
<Troubleshooting>
Suggested solutions
Unplug the power cord
and plug it back in. If the
problem persists, please
call for service.
Unplug the power cord
and plug it back inches. If
the problem persists,
please call for service.
Unplug the power cord
and plug it back inches. If
the problem persists,
please call for service.
Open and then close the
front cover.
Divide your mail or
reduce the resolution.
Delete unnecessary fax
jobs and retransmit after
more memory becomes
available. Alternatively,
split the transmission into
more than one operation.
Load paper in the multi-
purpose tray. See page
5.7.
Contact your network
administrator.
Try again. Make sure that
the receiving machine is
operational.
Enter the number or
email address manually
using the number keypad
or store the number or
address.
Load paper in the tray.
See page 5.5.
Reduce the resolution
and try again.