How To Update By Usb Memory - Denon AVR-1613 Service Manual

3. How to update by USB Memory

You can update the firmware by downloading the latest version with USB Memory.
3.1. Connecting to the Network
(1) Requirements
• USB Memory capacity : FAT16 : 2 GB, FAT32 : 2 TB
• USB memory devices will not work via a USB hub.
• It is not possible to use this unit by connecting the unit's USB port to a PC via a USB cable.
• Do not use an extension cable when connecting a USB memory device.
This may cause radio interference.
Place the USB update file in an appropriate folder. The folder name should be the Product ID based on the Model
name/area.
Model Name
AVR1613 North America (E3)
North America (E3)
AVR1713 Europe (E2)
China (E1C)
AVR1723 China (E1C)
(2) Setting
Download
firmware onto USB
memory.
3.2. Download the firmware
(1) While pressing the "STATUS" button and the "SOURCE SELECT 0 " button at the same time, power on this unit.
(2) "USB Update Start" appears in the FL display.
(3) Press the "ENTER" button with a remote controler. "UpdateFileCheck" appears in the FL display and the firmware
update starts.
(4) During the update, the power indicator lights in red and the GUI disappears.
The remaining update time appears FL display on the main unit.
When the update is completed, this unit returns to the normal state.
--- Cautions on Firmware Update ---
• Do not remove a USB memory until updating is completed.
• Do not turn off the power until updating is completed.
Approximately 1 hour is required for the updating procedure to be completed.
Once updating starts, normal operations on the this unit cannot be performed until updating is completed. Also, setting
items of the GUI menu of this unit or setting items of the image adjustment may be initialized.
Note down the settings before updating, and set them again after updating.
Model Area
000100570700
000100570100
000100570200
000100570500
000100570800
Insert the USB memory into a USB port.
Product ID
50