Printing In Netware; Adding A Queue; Adding A Printer - Samsung Network Printer User Manual

N
: Use NDS Setup if your network uses NetWare 4.x/5.x/
OTE
6.x in native mode. Use Bindery Setup if your network uses
NetWare 3.X or uses NetWare 4.x/5.x/6.x in bindery emulation
mode.

Printing in NetWare

To print to your network printer on a NetWare workstation, you
need to add a print queue.
N
: To use bindery emulation, you must log on to a Bindery
OTE
server as an administrator. In the NDS mode, log on to target
text of the NDS tree where you have administrator privileges.

Adding a queue

1
Open the NWADMIN dialogue box by double clicking on the
NetWare Client.
2
Right-click CONTEXT, then choose the create menu.
3
You will need to create all of the following items:
• Printer Server: represents a network print server.
• Printer: represents a network printing device.
• Printer Queue: represents a network print queue.
N : The New Object dialogue box lets you choose the class
OTE
of object to create.
4
Double-click each tree print object and select
Assignments menu.
5
Click Add.
The print server object which was created in Step 3 has a
link assigned to the printer object and the printer object a
link to the print queue object.

Adding a printer

1
Select Add Printer from the Printer and fax menu in the
control panel.
2
Select Network Printer and click Next.
3
Select Novell Directory Service, and then click the
context tree and an existing printer object name.
4
Click .
Next
5
If the server does not provide the printer driver or there is
no one available on the network, a dialogue box appears
to allow users to select a printer driver. Select the driver
and click Next.
6
Install the printer driver by following the onscreen
instructions.
4.2
NetWare environment