Advertisement
Zoom
Press this button (Zoom 2x, 3x, 4x) during normal, slow or still playback mode. This player can
magnify a picture and use direction buttons (
,
,
,
) to select desired part of the zoomed
picture.
Notes: • For JPEG files, press ZOOM and then REV or FWD until you reach the zoom size you
require. Press ZOOM again to quit the zoom function.
• WMA and MP3 discs does not support this function.
Angle
Viewing from a desired camera angle (Multi-Angle) [DVD]
Some DVD discs may contain scenes which have been shot simultaneously from a number of
different camera angles. The jacket or case of discs that are recorded with angle will be marked.
Note: The recorded angles differ depending on the disc used.
1. Play the disc that is recorded with angles.
2. Press the ANGLE button "
" appears on the screen.
3. Press the ANGLE button again to choose the desired angle, TV screen will change within one
or two seconds.
3D Sound
3D audio post-processing will give a multi-channel effect when using only 2 speakers. This only
works with discs encoded with Dolby. Pro Logic, Dolby Digital audio tracks.
• Press the 3D button repeatedly to achieve the highest quality sound. For Disc playback the
following surround effects will appear on the TV screen when you press the 3D button repeatedly:
SURROUND ROCK, SURROUND POP, SURROUND LIVE, SURROUND DANCE, SURROUND
TECHNO, SURROUND CLASSIC, SURROUND SOFT, SURROUND OFF
• DO NOT USE the feature if connecting to more than two speakers or if using coaxial or optical
digital output to acquire digital audio sound. Turn off the TV surround sound and other
surround sound effects when using this surround effect.
Mute
Press the MUTE button once to mute the sound, "MUTE" will appear on the TV screen, press the
MUTE button again to restore the sound.
Storing Bookmarks in the Memory to be Viewed
Storing a bookmarks in the memory is similar to marking your page in a book. You can quickly go
to any point on the disc.
Note: Some discs may not work Bookmark function. Storing, playing, and clearing a bookmark in
the memory, up to 12 points can be memorized for each disc.
1. Press the BOOKMARK button during play appear on the screen.
2. Press the PLAY button to choose start marking.
3. Press the Navigation button (
) to go to the new bookmark space.
4. Press the BOOKMARK button to leave Bookmark section.
5. Press the Skip ( / ) or Search ( / ) buttons to go to desired Title/Chapter section.
6. Press the BOOKMARK button to enter Bookmark section.
7. Repeat step 2 to 6 to program Bookmark.
8. Press the Navigation buttons (
/ ) to go to your desired Bookmark position.
9. Press the PLAY button to choose start Bookmark play. The playtime will display on screen.
10. Repeat step 8 to 9 to play Bookmark.
11. Press the CLEAR button to clear the old bookmark marking.
12. Exit the Bookmark section by pressing the Bookmark button.
Note: WMA & MP3 discs does not support this function.
Display button (OSD)
The display appears across the top of the screen when you press the DISPLAY button on the
remote while playing a disc. Press the DISPLAY button repeatedly to scroll through playback
information.
MP3/WMA Basic Operations
Playback of MP3/WMA CD
1. Press the STANDBY button to turn on the unit. If turned on with the remote control, the
STANDBY indicator will go out.
2. Press the OPEN/CLOSE button to open the disc tray. Insert an MP3 disc with the label side
facing up on the disc tray.
3. Press the OPEN/CLOSE button to close the disc tray. "Loading" will appear on the TV screen.
If your MP3 disc contains more than 99 music tracks, the 2 orange digits on the player display
that shows the disc total tracks will flash continuously to indicate the hundredth digit.
4. After loading, the Folder/Track Menu will appear on the TV screen. Press the Navigation
( , ) buttons to select your desired track.
5. Press the ENTER button to confirm to play the track.
6. Press the STOP (
) button to stop playback.
Selecting a Folder Menu
Press the Navigation (
) button when stop mode, then press the ENTER button. FOLDER MENU
will appear, press the Navigation (
,
) buttons to select the desired folder, then press the ENTER
button to choose the folder.
Return
Press the RETURN button to quickly go back to the menu page only when VCD version 2.0 disc is
playing and PBC function is ON.
CITIZEN C805DVD_Engib.p65
2
Digest (DVD and VCD)
Two digest types can be summarized from "Select Digest Type" Menu:
1. Track Digest: Choose your track starting picture by inputting number buttons and press enter to
confirm.
2. Disc Internal: Choose your 10 minute start-picture track by inputting nember buttons and press
enter to confirm.
Digest (CD)
Start the 6 second CD Scan function by pressing the DIGEST button when playing a CD.
Clear
Press the CLEAR button to erase a wrong input number.
Playback Control (PBC)
• The Playback Control feature is available only on Video CDs. Press the DVD MENU button to
turn the PBC feature on and off. The Playback Control feature supports the menus of the VCD
format similar to a DVD menu.
• When playing VCD with PBC function, you can enjoy simple interactive solfware on TV screen.
• When playback, there are such functions as track selection, stop, previous/next scene, fast
forward/backward, return, play/pause for you to select.
• PBC functions can be auto run after the disc is loaded.
• Desired tracks can be selected by pressing numberic buttons when PBC functions are on. After
selected, press ENTER, player will start playing the desired track.
Using the Setup Menus
Press the SETUP button to display the player's main menu.
Dolby Digital Setup
Preference Page
General Setup Menu
Exit Setup Menu
Dolby
- - General Setup Menu - -
TV Display
PS
TV Type
NTSC
Video Out
OSD Lang
ON
Captions
ON
Screen Saver
ON
HDMI Setup
OFF
HDMI Audio
PCM
Go To General Setup Page
The setup menu lets you customize the DVD player by allowing you to select various language
preferences and screen saver on/off, adjust what type of TV screen you have and more. Enter
the Setup Menu by pressing SETUP button.
Use the Navigation (
, ,
,
) buttons to navigate through the menus/screens and press the
ENTER button to select the highlighted option. To exit the Setup Menu, press the SETUP button.
General Setup Menu
TV Display
1. Normal/PS:
"PS" stand for "Pan Scan" This is selected when the unit is connected with a normal TV.
Wide-Screen images are shown on the screen, but with some parts cut automatically.
2. Normal/LB:
"LB" stand for "Letter Box" This is selected when the unit is connected with a normal TV.
Wide-screen images are shown on the screen, with black belt on the top and bottom.
3. Wide Screen:
This is selected when the unit is connected with a wide - screen TV.
TV Type
You may select according to the color system of the TV to be connected.
• Select "NTSC" for a NTSC TV.
• Select "PAL" for a PAL TV.
Video Out
Select the color video type and switch mode to fit your connector type:
S-Video: Select when using S-Video Output if your TV has S-Video connector to provide better
picture quality.
YUV: Select when using Component Video Outputs.
OSD Lang
• English: The OSD is in ENGLISH.
• Spanish: The OSD is in SPANISH.
• German: The OSD is in GERMAN.
• French: The OSD is in FRENCH.
Captions (OPTIONAL)
Select this option when some newer DVD movies include closed captioning for hearing impaired
viewers.
• Select "ON" to switch on the captioning feature that describes other sounds being heard
together with the dialog.
Screen Saver
Start the screen saver, the screen saver image appears when the unit stops or the image is
motionless for approximately 1 minute. This saver can keep the screen from being damaged.
• ON: Start the screen saver.
• OFF: Remove the screen saver.
HDMI Setup
If you are using the DVD Player's HDMI output to connect to your TV, set the HDMI Setup option to
the resolution that matches your TV. See the user's guide that came with your TV for information
on the highest resolution your TV supports.
HDMI Audio
Select the SPDIF or PCM (Pulse Code Modulation) format to output your Audio signal.
Dolby Digital Setup
The setting structure is:
Dolby
- - Dolby Digital Setup - -
Dynamic
FULL
3/4
1/2
1/4
OFF
Dynamic Range Compression
Dynamic
Select your desired Dynamic Range Compression Rate (DRC) to adjust linear compression results
of the signals.
1. Select Dolby and press (
, ) Navigation arrow button to enter Dynamic setting mode.
2. Press (
) Navigation arrow button to highlight the DRC level indicator.
3. Press (
,
) Navigation buttons to select your DRC rate level.
4. Press Enter to confirm your selection.
5. Press Setup to exit the Setup menu.
Preferences Setup
You must stop playback to enter preferences mode.
Dolby
- - Preference Page - -
Audio
ENG
Subtitle
ENG
Disc Menu
ENG
Go To Preference Page
The setting structure is: - - Preference Page - -
Audio
English
French
Spanish
German
Japanese
Subtitle
English
French
Spanish
German
Japanese
Off
Disc Menu
English
French
Spanish
German
Japanese
Select Languages and Menus
If a language of unit mentioned above is recorded on the disc, you can select sounds, subtitles, or
disc menu languages of player. If not the language recorded on the disc is shown.
8/11/2006, 3:25 PM
Troubleshooting
Before requesting service for this player, check the chart below for a possible cause of the
problem you are experiencing. Some simple checks or a adjustment on your part may eliminate
the problem and restore proper operation.
Symptom (Common)
Remedy
No power
• Insert the AC power plug securely into the power outlet.
Play fails to start even when
• Condensation has formed: wait about 1 to 2 hours to allow
PLAY is pressed.
the player to dry out.
Play starts but then stops
• This player cannot play a disc other than DVD, Video CD
immediately.
and CD.
• The disc may be dirty and may require cleaning.
• Ensure that the disc is installed with the lable side up.
No picture
• Ensure that the equipment is connected properly.
• Ensure that the input setting for the TV is "Video".
No sound
• Ensure that the equipment is connected properly.
Distorted sound.
• Ensure that the input setting for the TV and stereo system
are correct.
Picture is distorted during rapid
• The picture will be somewhat distorted at times: this is
advance or rapid reverse.
normal.
No rapid advance (or rapid
• Some discs may have sections which prohibit rapid
reverse play).
advance (or rapid reverse.)
No 4:3 (16:9) picture.
• Choose the correct setup "TV SCREEN" item which
matches the TV set used.
No operations can be performed
• Check the batteries are installed with the correct polarities
(+ and –).
with the remote control unit.
• The batteries are exhausted: replace them with new ones.
• Point the remote control unit at the remote control sensor
and operate.
• Operate the remote control unit at a distance of not more
than 6m from the remote control sensor.
• Remove the obstacles between the remote control unit
and remote control sensor.
No key operation (by the main
• Press STANDBY to set the player to the standby mode
unit and/or the remote control
and then back to ON. Alternatively, press STANDBY to
unit) is effective.
set the player to the standby mode, disconnect the power
plug and then re-connect it. (The player may not be
operating properly due to lightning, static electricity or
some other external factor.)
Symptom (DVD)
Remedy
Audio soundtrack and/or subtitle
• If the audio soundtrack and/or subtitle language does
language does not appear in the
not exist on the language selected at the initial settings
disc initial settings.
will not be seen/heard.
No subtitles.
• Subtitles appear only with discs which contain them.
• Subtitles are cleared from the TV monitor.
Alternative audio soundtrack
• An alternative language is not selected with discs which
(or subtitle) language fail to be
do not contain more than one language.
selected.
Angle cannot be changed.
• This function is dependent on software availability. Even
if a disc has a number of angles recorded, these angles
may be recorded for specific scenes only.
Symptom (Video CD)
Remedy
No menu play.
• This function works only for Video CDs with playback
control.
Technical Data
Power Requirements: AC 120V ~ 60Hz
Power Consumption: 15W
Signal System: NTSC
Operating Temperature Range: +5 to +35°C
Operating Humidity Range: 5 to 90% (no condensation)
Discs Played:
(1) DVD-VIDEO Disc: 12 cm single-sided, single-layer / 12 cm single-sided, dual-layer
12 cm double-sided, single-layer / 8 cm single-sided, single-layer
8 cm single-sided, dual-layer / 8 cm double-sided, single-layer
(2) Compact Disc: 12 cm disc / 8 cm disc
Specifications are subject to change without notice.
Region Management Information
This DVD/CD player is designed and manufactured to respond to the Region Management
Information that is recorded on a DVD disc. If the Region number described on the DVD disc does
not correspond to the Region number of this DVD/CD player, this DVD/CD player cannot play this
disc.
1
The Region number for this DVD player is
.
DVD Disc
There are the marks on some DVD disc package.
Notes:
• Only the above types of discs can be played on this unit.
DVD-ROM, CD-ROM, CDV, etc. cannot be played.
Some CD-R and CD-RW discs cannot be played depending on the condition of the player and
the disc.
• This unit is to be used exclusively with the NTSC or PAL colour system. SECAM system discs
cannot be used with this unit.
DVD Disc
DVD discs are divided into titles, and the titles are sub-divided into chapter.
Music CD Disc
Music CD discs are divided into tracks.
Notes on handling discs
• Do not expose the disc to direct sunlight, high humidity, or high temperatures for extended
periods of time.
• Discs should be returned to their cases after use.
• Do not apply paper or write anything on the disc surface.
• Handle the disc by its edge. Do not touch the playing surface (glossy side).
Fingerprints and dust should be carefully wiped off the playing surface of the disc with a soft
cloth.
Wipe in a straight motion from the centre to the outside of the disc.
• Never use chemicals such as record cleaning sprays, antistatic sprays or fluids, benzene or
thinner to clean discs.
This product incorporates copyright protection technology that is protected by method
claims of certain U.S. patents and other intellectual property rights owned by Macrovision
Corporation and other rights owners. Use of this copyright protection technology must be
authorized by Macrovision Corporation, and is intended for home and other limited viewing
uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
Apparatus Claims of U.S. Patent Nos. 4,631,603; 4,819,098; 4,907,093; 5,315,448; and
6,516,132 licensed for limited viewing uses only.
Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
HDMI and High-Definition Multimedia Interface are trademarks or registered trademarks of
HDMI Licensing LLC.
Advertisement
