Top View - Radio Shack TRS-80 CGP-220 Operation Manual

6
(J) Control Panel:
IRESTARTI
B
□ READY
D
ALERT
□ POWER
Figure 2-2. Control Panel
REST ART Switch. When you run out of paper, the Printer will stop printing. Load
paper and press this Switch to return the Printer to its status before the out-of-paper
condition occurred.
FEED Switch. Press this Switch once to advance paper one line. Keep pressing for
continuous feed. This Switch is operative only when the ON/OFF LINE Switch is set
to OFF LINE.
ON /OFF LINE Switch. This Switch sets the Printer ON or OFF LINE. When ON
LINE, the Printer can operate with a computer. To operate other front panel switches
or to stop printing, the Printer must be OFF LINE.
IMPORTANT NOTE FOR COLOR COMPUTER USERS.
Do not attempt to print when the ON-LINE/OFF-LINE switch is set to OFF-LINE. If
you do, unpredictable printing may occur.
READY Indicator. If illuminated, this indicator signals the CGP-220 is ON LINE
and ready to print.
ALERT Indicator. This Indicator will illuminate whenever the Printer is out of
paper, a carriage fault has been committed, or to signal some electrical problem.
POWER Indicator. This Indicator will illuminate whenever the Printer is turned ON.
Figure 2-3. Top View