Download Print this page

Whittier Wood 4705AFDH Assembly Instructions Manual

Eastport queen storage bed

Advertisement

Quick Links

Model #
4705AFDH
Eastport Queen
Storage Bed
Congratulations!
This fine piece of furniture will make a handsome
addition to your home. For the best results, start
by reading the Assembly Instructions before you
begin your project.
For normal household use only.
recommended for commercial use.
Unload items from this unit prior to moving.
Before loading or moving this unit, check all screws
and supports for tightness.
Do not overload the drawers.
P.O. Box 2827
Eugene, OR 97402 USA
Service Policy:
which are defective, missing or damaged.
Please contact Whittier Wood Products
customer service department directly (by
phone, fax, mail or E-mail) for replacement
parts.
Hours:
Our friendly customer service staff
can be reached Monday-Friday 7:00 a.m. to
5:00 p.m. (Pacific Time). A message can be
left 24 hours a day, 7 days a week.
To Order:
Provide the complete furniture
model number, part letter, production code,
quantity needed, reason for replacement
and your full name and address along with
a telephone number in case we need to
contact you.
Parts ship from our Eugene, Oregon factory
within 1 or 2 business days from the time
we receive the request. Please allow 5-10
business days for delivery.
800-653-3336
800-653-3336
Outside U.S. or Canada: 541- 687- 0213
Outside U.S. or Canada: 541- 687- 0213
Fax: 541-687-2060 • w ww
Fax: 541-687-2060 •
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A
Completely read the Assembly Instructions before
you begin your project.
Store the item: 1) in the box; 2) in a dry place; 3) in
temperatures ranging from 40° to 90°. (Not on a cold,
possibly damp, cement floor.)
Inspect your furniture periodically for any loose
glue joints, screws or any other problem that might
affect the stability of your furniture. Tighten or repair
as needed.
This Assembly requires two people.
Production Code:
VN
We will replace parts
w ww.whittie
.whittier r wood.com
wood.com
03/09

Advertisement

loading
Need help?

Need help?

Do you have a question about the 4705AFDH and is the answer not in the manual?

Questions and answers

Summary of Contents for Whittier Wood 4705AFDH

  • Page 1 Eastport Queen Storage Bed Service Policy: We will replace parts which are defective, missing or damaged. Please contact Whittier Wood Products customer service department directly (by phone, fax, mail or E-mail) for replacement parts. Hours: Our friendly customer service staff can be reached Monday-Friday 7:00 a.m.
  • Page 2 4705AFDH Eastport Queen Storage Bed — Parts List Before beginning assembly, identify the parts and make sure the quantities received match what’s on this list. If you need to replace a part, please refer to following list for its name and letter.
  • Page 3 Remove the Trestles (C &D) from the back of the Headboard as seen in Figure 1 and place them off to the side. 63" Fig. 2 Place both Pedestals (I) approximately 63" apart as shown in Figure 2. Page 3 — 4705AFDH — 03/09...
  • Page 4 Place four Trestles with T-Nuts (D) between Pedestals (I) and insert 1¾" bolt (F) and washer (H) as shown in Figure 4a. When installing Trestles (D), make sure the T-nuts face out as shown in Figure 4. Page 4 — 4705AFDH — 03/09...
  • Page 5 Assembly from the center as shown in Figure 6. Insert 2½" Hex Bolt (G) and Washer (H). See Figure 6a. DO NOT TIGHTEN BOLTS UNTIL FINAL ASSEMBLY IN STEP 10. Page 5 — 4705AFDH — 03/09...
  • Page 6 On each inner pair of trestles (C and D), place a Foot Assembly (U) between the two middle trestles as shown in Figure 7. Insert three #8x2" Black Screws (T) as shown in Figure 7a. Fig. 8 Rotate Pedestal Assembly to its original position. Page 6 — 4705AFDH — 03/09...
  • Page 7 NOTE: NOW TIGHTEN ALL BOLTS ON TRESTLES. Fig. 11 Foot Assembly (U) Leveler Bracket (V) Adjustable Glide (W) Adjust Glides (W) on the Foot Assemblies (U) so the Glides just touch the floor. See Figure 11. Page 7 — 4705AFDH — 03/09...
  • Page 8 Place Deckboards (P) as shown in Figure 12. There should be a small gap between each deckboard. Secure with #8x1¼" Black Screw (E). Carefully align drawer slides into the cabinet and gently push them back to their original positions. Sleep well, and enjoy! Page 8 — 4705AFDH — 03/09...