Samsung HG43AJ670U Install Manual page 29

Hotel Option menu Item
Self Diagnosis
for TV
Self Diagnosis for HTV
System
Software Update
Sound Bar Out
Contact Samsung
Standby LED
Boot Logo
TV Reset
Home Menu Display
Home
Menu
Home Menu Editor
Home Menu Auto Start
Description
Enter Self Diagnosis Menu.
• Start Picture Test: Use this test when you experience a problem with your TV's
picture.
• Start Sound Test: Use this test when you experience a problem with your TV's
sound.
• Signal Information: Show digital broadcasting signal information.
• Reset: Restore all TV settings, excluding network settings, to the factory defaults.
• STB SI Vendor Setting
– Lets you check the communication with the SI STB or SBB. If you have
any problems with the communications with the SI STB or SBB, use this
diagnosis function. If your broadcasting system does not have a problem,
contact Samsung Service. If STB SI Vendor Setting appears to have failed and
communication with the SI STB or SBB has failed, first check your SI STB or SBB.
If your SI STB or SBB does not have a problem, contact to Samsung Service.
• RTC
– If the time information is not correct when you turn the TV off and then on, use
this function.
– If the Real Time Clock (RTC) setting fails, contact a Samsung service centre.
Lets you upgrade the TV Software with a USB flash dirve.
If the Samsung Sound Bar device is connected to this TV, this item lets you to select
where the TV sound is outputted when the TV is turned on.
• ON: When the TV is turned on, the TV sound is automatically outputted in the
Sound Bar device only.
• OFF: When the TV is turned on, the TV sound is automatically outputted in the TV
speaker device only.
Display the web site of related Samsung service centre, software version, and Mac
address information.
When the TV is in standby mode, you can configure the settings of the power
indicator.
• ON: The LED is on.
• OFF: The LED is off.
To enable or disable displaying the Samsung logo when the TV turns on.
Returns all settings on the TV to their factory defaults.
Activate Home Menu in Standalone mode for user.
• ON: Home Menu enabled.
• OFF: Home Menu disabled.
In Standalone mode, you can quickly access to various features such as Source, Media
Play etc and settings such as Picture Size, Language, etc.
Edit and manage TV functions to be used from Home Menu.
This option allows you to set Home Menu as first screen for user.
• ON: Home Menu is shown as first screen.
• OFF: Do not show Home Menu as first screen.
English - 29