Battery & Charging; Charging Your Scooter - MEGAWHEELS S1 User Manual

3 BATTERY & CHARGING
This section is intended to provide you basic information about your battery
and charger. Please read this section carefully to ensure user safety and to
prolong the life of your battery, as well as improve battery performance.

3.1 Charging Your Scooter

Charge the MEGAWHEELS before using it. When battery indicator LED
lights show that the battery power is low, use the included charging cable
and its adapter to charge the MEGAWHEELS S1 electric scooter.
Step 1. Ensure the scooter is turned off before charging and remains off
while charging.
Step 2. Remove the cap covering the charger port, ensure that the charging
port is clean and dry.
Step 3. Plug the charger into the power socket, now the light on the charger
is green. Then plug in the charging port on scooter, while charging, the
charger light will turn red.
Step 4. When the scooter is fully recharged, the charger light will turn green
again. You may then disconnect the scooter from the charger.
IMPORTANT NOTES ON CHARGING
• DO NOT under any circumstances use the scooter while it is charging or
connected to the charger.
• The charging time is approximately 3 hours. Charging longer than that
may affect battery life and/or performance. If the charger's light doesn't turn
on, it may not be fully connected. Check that it is securely connected to the
power supply and to the scooter.
• The best charging temperatures are between 0°~40°. Extreme cold and
extreme heat will prevent your battery from charging fully.
• Use only the scooter charger that you received within your box with your
scooter.
• Only the indicator light on the charger will tell you the status of the battery
during charging.
09