Common Linux Problems; Common Macintosh Problems - Samsung ML ML-1630 User Manual

Common Linux problems

Condition
• Check if the printer driver is installed in your
system. Open Unified Driver Configurator
and switch to the Printers tab in Printers
configuration window to look at the list of
available printers. Make sure that your
machine is displayed on the list. If not,
please, invoke Add new printer wizard to set
up your device.
• Check if the printer is started. Open Printers
configuration and select your machine on
the printers list. Look at the description in
The printer doesn't
the Selected printer pane. If its status
contains "(stopped)" string, please, press
print.
the Start button. After that normal operation
of the printer should be restored. The
"stopped" status might be activated when
some problems in printing occurred.
• Check if your application has special print
option such as "-oraw". If "-oraw" is
specified in the command line parameter
then remove it to print properly. For Gimp
front-end, select "print" -> "Setup printer"
and edit command line parameter in the
command item.
Please avoid changing print job parameters
(via LPR GUI, for example) while a print job is
in progress. Known versions of CUPS server
I encounter error break the print job whenever print options are
"Unable to open changed and then try to restart the job from
mfp port device the beginning. Since Unified Linux Driver
file!" when printing locks mfp port while printing, the abrupt
a document. termination of the driver keeps the port locked
and therefore unavailable for subsequent print
jobs. If this situation occurred, please, try to
release the mfp port.
The CUPS (Common Unix Printing System)
When printing a
version distributed with SuSE Linux 9.2
document over the
(cups-1.1.21) has a problem with ipp
network in SuSE
(Internet Printing Protocol) printing. Use the
9.2, the printer
socket printing instead of ipp or install later
does not print.
version of CUPS (cups-1.1.22 or higher).
Suggested solutions

Common Macintosh problems

Problem
PDF file does not print
correctly-some parts are
missing in the graphics,
text or illustrations.
The document has
printed, but the print job
has not disappeared from
the spooler in
Mac OS 10.3.2.
Some fonts are not
printed properly in the
Adobe Illustrator
program.
7.13
<Troubleshooting>
Suggested solutions
Incompatibility between the PDF file and
the Acrobat products.
Printing the PDF file as an image may
enable the file to print. Turn on Print As
Image from the Acrobat printing options.
Note:
It will take longer to print when
you print a PDF file as an image.
Update your Mac OS to OS 10.3.3. or
higher.
Those fonts may not supported by your
machine. Start the Adobe Illustrator
program, click File > Print > Illustrator
tab. Then, check Force Fonts to
Download, and try again.