Related Manuals for AC Air Technology T1
Summary of Contents for AC Air Technology T1
- Page 1 MODEL: T1 / T1C / T1X / T1X-C TRACKS Instruction Manual World’s First Portable, Remote-Control Aircraft Tugs...
- Page 2 Contents 1. Components 2. Installation Guide 2-1. Installation 2-2. Warranty...
- Page 3 1. Components Part # 22844 Retainer Clip Tool Track Installation Tools Track...
- Page 4 2. Installation Guide 2-1. Installation 1. Remove battery cover and motor cover by removing 9 torx screws. Note: Some models need plug jack retaining nut removed to remove motor cover. Motor Cover Battery Cover Torx Screws 2. Remove all 4 plastic track guards by removing several Torx Screws. Torx Screws Plastic Track Guards...
- Page 5 3. Loosen track tension screw on track you are removing. Track Tension Screw 4. Remove one of the outter retainer clips from the track you are removing. Note: The retaining clip can be cut off with side cutters and discarded. Retainer Clip...
- Page 6 5. Remove the track pin from the track and then remove the entire track from the tug. Track Pin 6. Put the new track on the tug with the break at the front of the rail as shown. Break in track...
- Page 7 7. Put track install tool (part # 22844) on outside and inside track pins adjacent to break. Note: You will may need to hold the tools in place on the pins. Track Install Tools 8. Rotate motor by hand to move the break in the track back to straight part of rail while holding tools on the pins.
- Page 8 9. Line-up track holes and insert the track pin thru to other side. Install Tools Track Holes Track Pin 10. Insert new retainer clip on the end of the track pin. Use the retainer clip tool and tap it with a hammer while pressing on other end of the track pin with something to keep the pin from moving.
- Page 9 11. Re-install plastic track guards and motor cover and battery cover.
-
Page 10: Limited Warranty
In no event shall the liability of AC Air Technology exceed the individual price of the product on which liability is asserted. AC Air Technology has no control of the set up, ap- plication, use, modification, or misuse of this product, thus no liability shall be assumed or ac- cepted for any resulting damage or injury.