Reset Button; Replacing Batteries; Important Battery Information; Use And Care Instructions - Learning Resources Time Tracker User Manual

Use and Care Instructions

3
Do not submerge in water.
3
To clean, wipe gently with a damp, soft cloth.

RESET BUTTON

If the Time Tracker
a paper clip or similar small object to push the reset button,
located in the small hole above the adapter jack.

Replacing Batteries

Change the batteries when the sound becomes garbled or slows
down, or when pressing a button does not trigger a response
from the unit.
You will also need to replace the 2 "LR44" back-up batteries
from time to time. These batteries maintain your clock and time
settings should the regular batteries lose power and/or when
you are replacing the regular batteries.
To replace back-up batteries:
The back-up battery compartment is located inside the
battery compartment (under the AAA batteries). Use a small
Phillips screwdriver to turn the screw on the battery door in a
counterclockwise direction to loosen screw. Remove the screw
and open the door. Remove the 2 LR44 batteries. Insert two
new LR44 batteries, being careful to match the + and – ends
of the batteries to the diagram inside the battery compartment.
Replace the battery compartment door and insert the screw.
Tighten the screw by using a small Phillips screwdriver to turn
the screw in a clockwise direction until secure. Do not over
tighten the screw.

IMPORTANT BATTERY INFORMATION

Please read and understand these additional battery usage
instructions.
To ensure proper function:
• Battery installation and replacement should be done by an
adult only.
• Do not mix old and new batteries.
• Do not mix alkaline, standard, or rechargeable batteries.
6
6900 Time Tracker 2.0 GUD NBR.indd 6
isn't working correctly, use the end of
®
9/5/17 12:56 PM