To Set The Clock; To Set The Timer - Learning Resources Time Tracker User Manual

CLOCK

To set the CLOCK:

1. Press MENU to scroll through: CLOCK, TIMER,
AUTO TIMER.
2. When CLOCK appears on screen, press ENTER.
3. Use the ARROW
(military) time, then press ENTER.
4. Use the ARROW
ENTER. (Note: continue pressing the
from AM to PM.)
5. Use the ARROW
ENTER to confirm. The clock will start running.
TIMER
(input the exact amount of time you want each color section to
light up)

To set the TIMER:

1. Press MENU to scroll through: CLOCK, TIMER, AUTO TIMER.
2. When TIMER appears on screen, press ENTER to set or
change the time. (Note: if you already set the timer and you
just want to start it, press START).
3. Screen shows: GREEN and the green section will
light up.
• To input the amount of time you want the GREEN light to
be lit up: press ENTER to scroll forward to hours, minutes,
or seconds (press MENU to go backward).
• Use the ARROW buttons to input the hours, minutes, and
seconds. Press ENTER when you are done.
4. Repeat the above steps for yellow and red lights.
5. Screen will show TIMER with the total amount of time you
input.
6. Press START to start the timer OR press MENU to return to
digital clock mode.
7. To STOP timer, press and hold the MENU button.
4
6900 Time Tracker 2.0 GUD NBR.indd 4
◄►
buttons to choose 12 (standard) or 24
◄►
buttons to set the hours, then press
◄►
buttons to set the minutes, then press
◄►
buttons to change
9/5/17 12:56 PM