Magiclan Installation For Windows 98/Me/Nt4.0/2000/Xp/Ce; Installation Overview; Installation Procedure Of Windows 98 - Samsung MagicLAN SWL-2100N User Manual

Samsung magiclan user's manual

Hide thumbs Also See for MagicLAN SWL-2100N:

Table of Contents

3. MagicLAN Installation For

Windows 98/ME/NT4.0/2000/XP/CE

We will explain the installation method for

Here are some steps you will perform in establishing your wireless network connection:

1. Install the Access Point at first. AP is needed in case of Infrastructure network

mode.

2. You should install the Wireless LAN Card

3. Install the software using the Installation CD.

4. Install the network protocol(s) required to communicate on your network. Most

likely you will need the TCP/IP protocol.

Please follow the following steps one by one to install the

< Method 1 - Inserting card first >

1. Insert the

2. Add New Hardware Wizard appeared and the system looks for

11Mbps WLAN

driver for your device(recommended) is slected and then press NEXT button .

Insert the MagicLAN Installation CD into the CD-ROM drive.

3. Mark the Specify a location tap and type "E:\Drivers" right below in this

tap(Where E is the CD-drive of your PC).

PC Card

into the

PCMCIA slot

Card". Press NEXT button and check if Search for the best

SWL-2100N(PC Card)

(SWL-2100N).

PC card

of your computer.

successfully.

"SAMSUNG-

Table of Contents