Table of Contents
Advertisement
30
MAGIC REMOTE CONTROL FUNCTIONS
Registering Magic Remote Control
The Magic Remote Control operates by pairing with
your TV.Once you purchased the TV, please register the
Magic remote control as follows;
How to register the Magic Remote Control
To register automatically, turn the TV on and
press the
Wheel (OK). When registration
is completed, the completion message
appears on the screen.
If registration fails, turn the TV off and back
(Wheel)
on, then press the
complete registration.
How to Re-register the Magic Remote Control
1 Press and hold the
SMART
buttons together for 5 seconds
to reset, then register it by following "How
BACK
to register the Magic remote control"
above.
2 To re-register the Magic remote control,
SMART
press and hold the
seconds toward the TV.
How to use Magic Remote Control
1 You can move the pointer by moving the
remote up and down or left and right.
»
If the pointer does not work properly,
wait 10 seconds and then try again.
2 If the pointer disappears, move the remote
control slightly to left or right. It will then
automatically appear on the screen.
»
If the pointer has not been used for a
certain period of time, it will disappear.
Wheel (OK) to
1
2
BACK and
Precautions to Take when Using
BACK button for 5
the Magic Remote Control
Use the Magic remote control within the maximum
y
communication distance (10 m, 32.8ft). Using the remote
control beyond this distance, or with an object obstructing it,
may cause a communication failure.
A communication failure may occur due to nearby devices.
y
Electrical devices such as a microwave oven or wireless
LAN product may cause interference, as these use the same
bandwidth (2.4 GHz) as the Magic remote control.
The Magic remote control may be damaged or may
y
malfunction if it is dropped or receives a heavy impact.
y
Take care not to bump into nearby furniture or other people
when using the Magic remote control.
Manufacturer and installer cannot provide service related to
y
human safety as the applicable wireless device has possibility
of electric wave interference.
It is recommended that an Access Point (AP) be located more
y
than 1 m (3.28 ft) away from the TV. If the AP is installed
closer than 1 m (3.28 ft), the Magic remote control may not
perform as expected due to frequency interference.
More
If you press
Wheel (OK). on the Magic Remote
Control, the following screen appears.
Shows information about the current programme and
screen.
You can select More Menu.
Info.
Advertisement
Table of Contents
