Auto Meter DashLink Quick Start Manual

1
Download and Install the
AutoMeter DashLink App from the
Google Play Store or Apple App
Store on your mobile device.
Auto Meter Products, Inc. All Rights Reserved.
Quick Start Guide
DashLink Gauge System
2
Plug the DashLink Dongle into
your vehicle's OBD Port. It is
typically located on the lower left
side of the driver's side foot well.
3
Turn vehicle ignition key to On,
or Start Engine. You will see the
Green PWR turn On.
Go to http://www.autometer.com/media/manual/2650-1900.pdf
the Full Owners Manual for the DashLink Gauge System.
4
On your mobile device, open the
Settings Menu and confirm your
Bluetooth is enabled.
Android
Apple
for
2650-1914-77 2/22/17