TDC Kruze KZ800 User Manual page 18

800 watt
Table of Contents

Advertisement

Problem
Scooter runs
sluggishly
Sometimes the
scooter doesn't
run, but other
times it does
Scooter makes
loud noises or
grinding sounds
Troubleshooting
Possible Cause
Riding
conditions are
too stressful
Tires are not
properly inflated.
Scooter is
overloaded.
Loose wires or
connectors
Motor or
electrical switch
damaged
Chain is too dry
18
Possible Cause
Use only on solid, flat, clean and dry
surfaces such as pavement or level
ground.
The tires are inflated when shipped,
but they invariably will lose some
pressure between the point of
manufacturing and your purchase.
Inflate to the proper pressure.
Make sure you do not overload the
scooter by allowing more then one
rider at a time, exceeding the 200lb
maximum weight limit, going up a
hill or towing objects behind the
scooter. If the scooter is overloaded,
the circuit breaker may trip and
shut off power to the motor. Correct
the riding conditions that caused
overload, wait a few seconds and
push the breaker to rest the circuit.
Avoid repeatedly tripping the circuit.
Check all tires around the motors
and all connectors to make sure
they are tight
Contact your local authorized
service center for diagnosis and
repair.
Apply a lubricant on the chain.

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for TDC Kruze KZ800

Table of Contents