TDC Kruze KZ800 User Manual page 11

Required Tools
Key wrenches
(Included)
Assembly Instructions
14mm wrench
(Included)
1. Carefully remove the scooter from the box. To
unfold the scooter, begin by pressing down on
the FOLDING HANDLE with one hand and lifting
up on front handle bars.
2. Fully extend the handle bars to their upright
position until you feel the mechanism lock into
place
3. Attach the handlebars by inserting the silver
handlebar clamp onto the handlebar post
stopping just below the top. Be sure to orient the
bars in the correct riding position with the throttle
on the rider's right side. Secure the handlebars
to the post by tightening the bolts on the clamp
with the enclosed Allen wrench as shown.
4. Secure the hand brakes in place by using the
provided Allen Wrench to first loosen the tension
bolts. Adjust the levers to a comfortable position
and tighten the bolts. *BE CAREFUL NOT TO
PULL ON THE CABLES!
11
Bicycle-style
tire pump with
pressure gauge
(Not Included)