Storing The Headphones; Troubleshooting; Listen Safely - Acoustic Research ARW200 User Manual

Usb 5.1 surround sound headphones
Table of Contents

Advertisement

s
torInG the
The ARW200 headphones come with a travel pouch for convenient storage on
the go.
To store the headphones:
1. Unzip the travel pouch.
2. Fold the earpieces flat and push them toward the top of the headband. The
bottom of the headband should cross.
3. Bundle up the cord and place it in the center of the folded headphones.
4. Place the headphones and cord in the travel pouch, and zip the pouch
closed.
t
roUbleshootInG
The following troubleshooting guide takes you through two of the more
common problems associated with the installation and/or operation of the USB
headphones. If the problem you are experiencing persists, please call toll-free
1-800-732-6866 or visit www.araccessories.com.
ISSUE: No sound
• Check that your PC is turned on, and make sure that the PC's mute function
has not been activated.
• Confirm that the headphones' USB connector is properly connected to a USB
port on your PC.
ISSUE: Interrupted sound
• Check that there is a secure connection between the headphones' USB
connector and a USB port on your PC.
• Remove the headphones' USB connector from the USB port it is currently
connected to and connect it to a different USB port on your PC.

Listen Safely!

Enjoy your earphones at a safe volume. Avoid or limit the amount of time you
listen at higher volumes—permanent hearing loss may occur if the earphones
are used at too high a volume. If you experience a ringing in your ears, or
your own voice and other sounds seem muffled, stop using the earphones and
consult a hearing professional.
a
h
eadphones
ddItIonal
I
nformatIon
7

Advertisement

Table of Contents
loading

Table of Contents