IVIEW Smart Vacuum Important Safety Instructions Manual

Hide thumbs Also See for Smart Vacuum:

Advertisement

Quick Links

1 Important safety instructions

Please read the following safety instructions before using this product
to avoid damage.
Warning! Violation of safety instructions may cause severe personal casualty
and property loss.
Do not put weight on the power cord
or bend the power cord, otherwise
may cause electric shock or fire.
Do not handle the power cord with
wet objects, otherwise may cause
electric shock.
While in use, keep objects like clothes
and hair away from the device. Do
not touch the wheels or brushes of
the device while in use.
Make sure the charger is firmly
plugged into the socket. Otherwise
may cause electric shock, short-
circuit, smoke or fire.
Do not stand or sit on the product,
otherwise may cause product damage
or personal injury.
Clear up all fragile, braided fabrics,
glasses or bottles before use it,
otherwise may cause damage
To avoid injury, be careful when
operating this product around
children.
Please switch the product off when
not in use for long periods of time.
Children and people with disabilities should not operate this product without direct
supervision.
Always use the original charger with ^ this
product, otherwise may cause product
damage, electric shock or fire.
Keep the product away from heat
or flammable objects.
Do not attempt to disassemble or after
the main machine, otherwise may cause
fire, electric shock or personal injury.
Do not use the product to vacuum stones,
metals, large pieces of waste, or heated
objects like cigarette butts.
To avoid product damage, do not use in
elevated areas (IE, stairs, balconies,
etc.), where it may fall.
Do not use the product to vacuum water
or other liquids, otherwise may cause
product damage
This product is meant for indoor use
only. Do not operate outdoors.
Do not use it in public commercial places.

Advertisement

Table of Contents
loading

Summary of Contents for IVIEW Smart Vacuum

  • Page 1: Important Safety Instructions

    1 Important safety instructions Please read the following safety instructions before using this product to avoid damage. Warning! Violation of safety instructions may cause severe personal casualty and property loss. Do not put weight on the power cord Always use the original charger with ^ this or bend the power cord, otherwise product, otherwise may cause product may cause electric shock or fire. damage, electric shock or fire.
  • Page 2 2. Components 2.1 The main machine 1 Anti-falling Sensor 7 Anti-collision sensors 13 Display panel 2 Charging Pole 8 Tape 14 Auto-cleaning 3 Side brush 9 Universal wheel button 4 Driving wheel 10 Charging socket 5 Main brush 11 Power switch 6 Dustbin and water 12 Dust box and water tank tank assembly key 2.2 Charging station 1 Signal receiving window...
  • Page 3 2.3 Display panel WIFI display Battery status Time/Plan display 2.4 Remote control 1 On/Off button 2 Auto button 3 Ok button 4 Edge cleaning button 5 Clock button 6 Strong cleaning button 7 Plan button 8 Spot cleaning button 9 D mode button 10 Direction button 11 Auto-charging button...
  • Page 4: Product Operations

    3. Product operations 1. Charging station 3 Disassemble of main brush 1. Place charging station against wall and Push the button on the main brush, then remove any obstacles within a 2 meter take out the roller brush and fur brush. radius of the charging station. (as show in the figure) 2. Connect the adapter to DC charging socket on charging station.
  • Page 5: Charging Status

    5 Mop 6 Fill water in water tank Install the mop on the water tank. Pull the rubber cover, fill in water, and install the rubber cover again. 3.2 Product charging 1. Manual charging Connect the power plug directly to the DC socket for charging. (As show in figure) 3 Charging status 1 Please make sure the battery has been charged for 12 hours for the first charging. While charging, the charging status light will begin flashing; when 2 Auto charging fully charged, the charging status light...
  • Page 6: Product Mode

    3.3 Product Mode sleep mode, by pressing the power button on the remote, while the device is in standby mode. 1 Cleaning mode: The robot is cleaning, 3 When the device is in sleep mode, display panel is On you can wake the device by pressing the 2 Standby mode: Power switch is On, power button on either the remote or display panel is On...
  • Page 7 5 D Cleaning 2 Note: If you want to terminate the Spot Cleaning mode, press any Cleaning 1 When the robot is on, or in cleaning, or buttons on the robot control or the in charging status (connected to charging robot to stop this mode; also the robot station), press D button on the remote will automatically stops cleaning when control to activate this mode. The robot...
  • Page 8: Remote Control Operation

    3.6 Remote control operation to have the robot begin cleaning after it's been fully charged. Press this button to wake the robot Direction button from sleep mode. Press it again to have Forward the robot enter sleep mode. Increase number when In Timing Setting or Scheduling Setting. Robot moves forward when In Standby Mode or any Auto button other Cleaning Modes.
  • Page 9: Product Maintenance

    4. Product maintenance 4.1 Dustbin and filter 4.3 Other parts 1 Take the filtering cloth out as per Keep the universal wheel clean figure and clean it (when washing the of hair, animal dander and string. dustbin, make sure it's dry before using Clean all sensors using a soft again) cloth. 2 Notes: Do NOT clean filter with water. Cleaning charging poles using a Please clean it by using a soft brush.

Table of Contents