Installation; Points To Be Paid Attention To When The Relocation Of The Refrigerator; Electrical Connection; Disposing Of The Packaging - Beko RDNT200I50VS User Manual

Hide thumbs Also See for RDNT200I50VS:
Table of Contents

Advertisement

3

Installation

In case the information which are given in the user manual are not
taken into account, manufacturer will not assume any liability for this.

Points to be paid attention to when the relocation of the refrigerator

Your refrigerator should be unplugged.Before transportation of
1.
your refrigerator, it should be emptied and cleaned.
Before it is re-packaged, shelves, accessories, crisper, etc. inside your
2.
refrigerator should be
Package should
be bound with a thick tape or sound ropes and the transportation
rules
on the package should be strictly observed.
Original packaging and foam materials should be kept for future
3.
transportations or moving.
Before you start the refrigerator, Check the following
start to use your refrigerator:
Clean the interior of the refrigerator as recommended in the
1.
"Maintenance and cleaning" section.
Connect the plug of the refrigerator to the wall socket. When the fridge door
2.
is opened, fridge internal lamp will turn on.
When the compressor starts to operate, a sound will be heard. The
3.
liquid and gases sealed within the refrigeration system may also give rise
to noise, even if the compressor is not running and this is quite normal.
. Front edges and both sides of the refrigerator may feel warm. This is
4.
normal. These areas are designed to be warm to avoid condensation.

Electrical connection

Connect your product to a grounded socket which is being protected by a
fuse with the appropriate capacity.
Important: The connection must be in compliance with national regulations.
The power plug must be easily accessible after installation.
Electrical safety of your refrigerator shall be guaranteed only if the earth
system in your house complies with standards.
The voltage stated on the label located at left inner side of your
product should be equal to your network voltage.
Extension cables and multi plugs must not be used for connection.
A damaged power cable must be replaced by a quali d electrician.
Product must not be operated before it is repaired! There is the risk of electric shock!

Disposing of the packaging

The packing materials may be dangerous for children. Keep the packing materials.
out of the reach
the waste instructions stated by your local authorities. Do not throw away
with regular house waste, throw away on packaging pick up spots designated by
the local authorities
materials.
of children or dispose of them by classifying them in accordance with
The packing of your refrigerator is produced from recyclable
before you
7
EN
red against impacts.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rdnt200i50s

Table of Contents