Advertisement
I N T R O D U C T I O N
Thank you for selecting the Martin 05 Repeater. The 05 Repeater is part of
the Alien 05 system and is used to connect up to 24 additional Alien 05
luminaires to a single control channel from the 05 Driver unit. These
luminaires will respond in the same way as they will have the same control
signal.
For a detailed description of the Alien 05 System, refer to the 05 Driver user
manual.
S A F E T Y I N F O R M A T I O N
Warning!
This product is not for household use.
Read this manual before powering or installing the device, follow the safety
precautions listed below and observe all warnings in this manual and on the
housing. If you have questions about how to operate the system safely,
contact your Martin dealer or call the Martin 24-hour service hotline at +45
70 200 201.
• Install only in a dry area.
• Refer electrical installation to a qualified electrician.
• Refer all service to a Martin technician.
• Use only a source of AC power that complies with local building and
electrical codes and has both overload and ground-fault protection.
• Do not remove the cover.
• Do not modify the device.
P O W E R I N G T H E 0 5 R E P E A T E R
The 05 Repeater features an auto-ranging power supply. It is suitable for
use with 90 - 250 V, 50/60 Hz mains supplies. Use a cable with a 3 pin IEC
female plug.
Warning!
For protection from dangerous electric shock, the fixture must
be grounded (earthed). The AC mains supply shall be fitted with
a fuse or circuit breaker, ground-fault protection, and a means
to isolate the fixture from the mains during service or when not
in use. Refer electrical installation to a qualified electrician.
3
Advertisement
