Page 3
Thank you for selecting the Martin 05 Repeater. The 05 Repeater is part of the Alien 05 system and is used to connect up to 24 additional Alien 05 luminaires to a single control channel from the 05 Driver unit. These luminaires will respond in the same way as they will have the same control signal.
Page 4
Use a CAT5 cable to connect this to: • One of the six output channels on an 05 Driver, or • One of the six output channels on another 05 Repeater (that is itself connected directly or indirectly to an 05 Driver), or...
Page 5
Conn ecting Alien 05 luminaries to the 05 Repeater You can connect up to twenty-four Alien 05s to a single 05 Repeater - in 6 outputs (A-F), each containing up to four daisy-chained luminaries. The maximum data cable length between the 05 Repeater output and the last fixture in the daisy chain is 40 meters (130 feet).
Page 6
• The ambient temperature does not exceed 40° C (104° F). • The unit is protected from moisture. Four 7 mm (1/3 in.) holes are provided on the 05 Repeater casing for fixed installation. O U T P U T F A I L U R E L E D S When illuminated, these LEDs - for outputs A to F - indicate that there has been a line failure on the associated Output connector.