Advertisement
Quick Links
Advertisement
Related Manuals for Nova LCD1U17-33
Summary of Contents for Nova LCD1U17-33
- Page 1 Toll Free: 1-888-865-6888 Tel: 510-226-8368 Fax: 510-226-8968 Email: sales@RackmountMart.com...
- Page 2 L CD 1U15-18 / 17-3 3 / 19-24 / 19-26 Single Rail Console with Modular KVM Switch Quick Installation Guide Rev 2.0...
-
Page 3: Installation
1. Installation 1.1 Install L CD 1U15-18 / 17-3 3 / 19-24 into Cabinet 1.1.1 Notes 1. Please check all peripherals according the list before installation. To make sure that the whole unit was not damaged and lost during shipping process. If you encounter any problem, please contact your dealer. - Page 4 3. Short bracket x 2 4. Bracket attachment x 2 L CD 1U15-18 / 17-3 3 bracket attachment L CD 1U19-24 bracket attachment 5. Screw (length = 6 mm) x 6 6. Screw x 6 7. Key x 2 Step A: 1.
- Page 5 2. Loose (Not remove) seven screws. 3. Adjust rail to fit your cabinet 4. Install front and rear bracket on cabinet. 5. Tight seven screws up. www.RackmountMart.com...
- Page 6 6. Repeat step 1~5 for the other side. 7. Push console into rails. (Be careful rear box loose when take out console from carton.) 8. Unlock and pull rail–lock switch (left and right at the same time) then push console to the end. lock unlock rail-lock switch...
- Page 7 Step B: 1. Remove seven screws. 2. Take two original brackets out. original bracket original bracket 3. Put short bracket to rear of the rail. short bracket 4. Install four screws (don’t tight-up) to combine rail, short bracket and bracket attachment.
- Page 8 Step C: 1. Loose (Not remove) seven screws. 2. Release six screws. 3. Take rear bracket out. original bracket 4. Adjust rail and input extended bracket to rear of the rail then adjust extended bracket to fit your cabinet. Install unless 2~3 screws (don’t tight-up) upon the length you need.
- Page 9 1.2 Install L CD 1U19-26 into Cabinet Notes 1. Please check all peripherals according the list before installation. To make sure that the whole unit was not damaged and lost during shipping process. If you encounter any problem, please contact your dealer. 2.
- Page 10 Install Console Steps 1. Adjust rail until two screws appear. Loose (Not release) two rear screws then adjust rear bracket to fit your cabinet. Rail 2. Install front and rear bracket on cabinet. 3. Tight-up two rear screws. 4. Repeat step 1~3 for the other side. www.RackmountMart.com...
- Page 11 5. Pull rail until it lock and keep the part A in front of the rail (Both sides).Then push console into left and right rails. (Be careful rear box loose when takeout console from carton.) P a rt A 6. Pull rail–release switch (left and right at the same time) then push console to the end.
Need help?
Do you have a question about the LCD1U17-33 and is the answer not in the manual?
Questions and answers