red lion PSDR1 Bulletin

Tel +1 (717) 767-6511
Fax +1 (717) 764-0839
www.redlion.net
MODEL PSDR - 24 V POWER SUPPLIES @ 1, 2, OR 4 A

SPECIFICATIONS

1. POWER REQUIREMENTS:
Nominal Input Voltage: 100 to 240 VAC
Input Voltage Range: 85 to 264 VAC or 90 to 350 VDC
Current Consumption at nominal input voltage:
PSDR0100: 0.5 A to 0.2 A @ 100 to 240 VAC, 0.4 to 0.1 A @ 90 to 350 VDC
PSDR0200: 0.82 A to 0.33 A @ 100 to 240 VAC, 0.65 to 0.19 A @ 90 to 350 VDC
PSDR0400: 1.8 A to 0.7 A @ 100 to 240 VAC, 1.3 to 0.4 A @ 90 to 350 VDC
2. FREQUENCY: 50 to 60 Hz
3. INPUT RECOMMENDED BACKUP FUSE:
Power Circuit Breaker: 6 A or 10 A
Characteristic: B (EN 60898)
4. SURGE VOLTAGE PROTECTION: Varistor
5. POWER OUTPUT: Nominal value of 24 VDC ±1%. Adjustable from 22.5
to 28.5 VDC via potentiometer
6. EFFICIENCY AT 230 VAC AND NOMINAL VALUES: > 80 %
7. ENVIRONMENTAL CONDITIONS:
Operating Temperature Range: -25 to 60°C
Storage Temperature: -40 to 85°C
Humidity, no moisture condensation: 95 % at 25°C
Vibration in acc. with IEC 68-2-6: < 15 Hz, amplitude ±2.5 mm;
15 Hz - 150 Hz, 2.3 g
Shock in all directions acc. with IEC 68-2-27: 30 g
Contamination in acc. with EN 50178: Degree of pollution 2
8. STANDARDS AND CERTIFICATIONS:
Electrical Safety (of information
technology equipment)
Industrial regulating devices
Electronic equipment for use in
electrical power installations
(surge voltage category III)
Limitation of output power
Safe isolation
Protection against electric shock
DIMENSIONS In inches (mm)
EN 60950 / VDE 0805
UL Recognized UL 60 950
UL 508 listed
U L
C US
4
LISTED
EN 50178 / VDE 0160
NEC Class 2
VDE 0100-410
DIN VDE 0106-101
MODEL C
PSDR0100 0.87 (22.5)
PSDR0200 1.77 (45)
PSDR0400 2.66 (67.5)
DESCRIPTION
The compact PSDR power supplies are industrial input voltage supplies with
primary switched-mode regulator technology. They feature low output ripple
and adjusted output voltage from 22.5 to 28.5 VDC. The output is electronically
protected against overloads and short circuits.
The modules snap onto standard 35 mm flat DIN rails and use removable
terminal blocks for easy wiring.
In conformance with EMC guideline 89/336/EEC
and low-voltage directive 73/23/EEC
EMC (Electromagnetic compatibility)
Immunity in accordance with EN 61000-6-2
Discharge of static electricity (ESD)
EN 61000-4-2
Electromagnetic HF field
EN 61000-4-3
Fast transients (Burst)
EN 61000-4-4
Surge voltage capacities (Surge)
EN 61000-4-5
Conducted disturbance
EN 61000-4-6
Voltage dips
EN 61000-4-11
Simulation mobile phones ENV 50204
Noise emission according to EN 50081-2
Emitted radio interference
Radio interference voltage
EN 55011 corresponds to CISPR11 / EN 55022 corresponds to CISPR22
EN 61000 corresponds to IEC 1000
1) Normal operating behavior within the defined limits.
Criterion A:
Temporary impairment to operational behavior, that is
2)
Criterion B:
corrected by the device itself.
3) Conductor to conductor.
Symmetrical:
4) Conductor to ground.
Asymmetrical:
5) Area of application industry and residential.
Class B:
9. ISOLATION VOLTAGE: Input/Output 3 kVAC
10. INSTALLATION POSITION: On horizontal mounting rail according to
EN 50022-35
11. CONNECTIONS: 24 to 14 AWG max. Torque 4.5 to 5.3 inch-lbs
(0.5-0.6 Nm).
12. MOUNTING: Standard DIN rail top hat (T) profile rail according to
EN50022 - 35 X 7.5 and 35 X 15. Can be mounted in rows with vertical
Spacing > 5 cm or horizontally with no space.
13. CONSTRUCTION: Case body is black, high impact plastic. IP20 touch
safe. Protection Class II.
14. MTBF (Mean Time Between Failure): >500000 h in acc. with IEC 1709 (SN
29500)
15. WEIGHT:
PSDR0100: 7.4 oz. (210 g)
PSDR0200: 8.8 oz. (250 g)
PSDR0400: 14.1 oz. (400 g)
Bulletin No. PSDR-A
Drawing No. LP0604
Released 8/07
2) Housing > Level 3
Contact discharge: 8 kV
Discharge in air: 8 kV
1) Housing Level 3
Frequency/Field intensity: 80-1000
MHz / 10 V/m
2) 4)
Input: 4 kV (Level 4)
4)
Output: 2 kV (Level 3)
4)
Signal: 1 kV (Level 2)
2) 4) 4)
Input: 4 kV / 2 kV (Level 4)
4) 3)
Output: 0.5 kV / 0.5 kV (Level 1)
4)
Signal: 0.5 kV (Level 1)
I/O/S: Level 3
1)
Frequency/U : 0.15-80 MHz / 10 V
o
Input: see mains buffering
2)
> 20 ms
Frequency: 900 MHz, 1800 MHz
Field intensity: 20 V/m
5)
EN 55011 (EN 55022) Class B
EN 55011 (EN 55022) Class B 5)