CHASSIS WIRE DRESSING DETAIL (ALL EXCEPT KV-34XBR960)
CHASSIS WIRE DRESSING DETAIL (ALL EXCEPT KV-34XBR960)
KD-30XS955/34XBR960/34XS955/36XS955
Downloaded from
www.Manualslib.com
manuals search engine
CRITICAL POINT:
Main cable bundle MUST be dressed as LOW
as possible between cement resistor and heat sink.
Wires cannot touch heat sink (sharp edges) or the
cement resistor (very hot).
KD-30XS955/34XBR960/34XS955/36XS955
x3 11mm purselock
(NOTE positions of
purselocks on main
cable bundle.)
XS Models do NOT
have Sub-Tuner
Pin-Plug Cable
XS Models do NOT
have iLINK (iEEE)
Cable.
32