In the interest of safety, all lockers must be securely anchored to the floor and/or wall. For safety, handle all components carefully and wear work gloves when assembling lockers. Install all units plumb and tighten all hardware securely. Retain instructions for future reference. 866-566-0500 info@Hallowell-List.com www.Hallowell-List.com...
Page 2
KID LOCKERS - ASSEMBLY INSTRUCTIONS - HKL151524-1 PACKAGE CONTENTS ITEM PART # DESCRIPTION QTY. KDHF1518/24LV FRAME AND DOOR ASSEMBLY KR1518 BACK HTLC1515 KP1518 SIDES KS1515 BOTTOM LEGS MBT200 3/8" SLOTLESS BOLT N201 HEX NUT N110 DOME HEX NUT RPE100 ESCUTCHEON PLATE PG.
Page 3
NOTE: FINGER TIGHTEN ALL NUTS, ENSURE UNIT IS SQUARE, THEN TIGHTEN ALL. 2) Bolt Top (3) 1) Bolt Side to the outside panels (4) to of the side and the inside of rear panels. the rear panel (2). 3) Bolt Bottom 5) Place the (5) to the insde Frame (1) on...