Listening to Radio
Remote Control Unit
Press the TUNER
1
2
Tune in to the
button to select the
desired station.
FM band.
•
Automatic Tuning 1
Each time the button is pressed,
the band switches between
"FM".
Automatic Tuning 2
Manual Tuning
Main Unit
1
2
Press the
Select a broadcast
FUNCTION button to
station.
select the FM band.
Automatic Tuning 1
PRESET and then press
button to select the preset station.
Automatic Tuning 2
and then press and hold
button to automatically search the band.
Manual Tuning
press
higher frequency.
Press MO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
•
Each time the button is pressed, the sound switches between "STEREO" and "MONO".
•
In a poor reception area, select MONO for a clear, interference-free broadcast.
63
When
is pressed, a
preset broadcast station is
selected.
Press and hold TUNING/CH to
automatically search for active
broadcasting stations.
Briefly press TUNING/CH to
increase or decrease the
frequency incrementally.
Press the STOP ( )
button to select
Press the STOP ( )
button to select "MANUAL"
Press STOP ( ) to select
MANUAL and then briefly
to tune in to a lower or
Presetting Stations
Example: Presetting FM 89.1 in the memory
Press the TUNER
1
2
Press TUNING/CH
button to select the
to select "89.10".
FM band.
•
•
Each time the button is pressed,
Refer to Step 2 on page 63 to
the band switches between
automatically or manually tune in
"FM".
to a station.
4
Press
5
Press the TUNER
to select preset
MEMORY button
number.
again.
•
•
You can select between 1 and
Press the TUNER MEMORY button before
'PRGM' disappears from the display.
15 presels.
•
'PRGM' disappears from the display and
the station is stored in memory.
Note
•
This unit does not receive
AM broadcasts.
To tune in to a preset station, press
remote control to select a channel.
ENG
3
Press the TUNER
MEMORY button.
•
"PRGM" flashes in the display.
To preset another
6
station, repeat
steps 2 to 5.
on the
64