Download Print this page

Philips BT720 Series Manual page 2

Hide thumbs Also See for BT720 Series:

Advertisement

Available languages

Available languages

Electromagnetic fields (EMF)
-
This Philips appliance complies with all
applicable standards and regulations regarding
exposure to electromagnetic fields.
General
-
The appliance is suitable for mains voltages
ranging from 100 to 240 volts.
-
The supply unit transforms 100-240 volts to a
safe low voltage of less than 24 volts.
Display
Battery status indications
-
When the battery is almost empty, the battery
charge indicator flashes orange (Fig. 3).
-
When the appliance is charging, the battery
charge indicator flashes white (Fig. 4).
-
When the battery is fully charged, the battery
charge indicator lights up white continuously
(Fig. 5).
Note: The lights switch off automatically after
30 minutes.
Hair length indications
The selected hair length setting will show above
the zoom wheel when you select the desired
length setting with the zoom wheel (Fig. 6).
Charging
Charging takes approx. 1 hour. Charge the
appliance before you use it for the first time and
when the display indicates that the battery is
almost empty.
1
Make sure the appliance is switched off.
2 Put the adapter in the wall socket and put the
small plug in the appliance (Fig. 7).
3 After charging, remove the adapter from the
wall socket and pull the small plug out of the
appliance.
When the appliance is fully charged, it has a
cordless operating time of up to 60 minutes.
Using the appliance
Note: This appliance can be used without cord or
directly from the power outlet.
You can use this appliance for a stubble and
a short beard. This appliance has an integrated
vacuum system that catches cut beard hair for
a less mess trimming experience.
The vacuum system is activated automatically as
soon as you switch on the appliance.
Note: Switch off and clean the appliance after
each use.
Switching the appliance on and off
Press the on/off button once to switch the
appliance on or off (Fig. 8).
Trimming without comb
-
You can use the appliance without beard and
stubble comb to trim hair close to the skin or
to contour the neckline and sideburns. To trim
hair close to the skin, place the flat side of the
trimming head against your skin and make
strokes in the desired direction (Fig. 9).
-
You can use the precision trimmer to create
fine lines and contours around your facial style,
close to the skin (Fig. 10). Simply pull the cutting
element straight off (Fig. 11) and insert the
precision trimmer (Fig. 12).
-
For contouring hold the trimming head
perpendicular to the skin and move the
trimming head upwards or downwards with
gentle pressure (Fig. 13).
Trimming with comb
You can use the beard and stubble comb attached
to the cutting element to groom your beard and
moustache in your preferred style. You can choose
from 20 length settings ranging from 0.5mm to
10mm in steps of 0.5mm.
1
Attach the comb onto the appliance (Fig. 14).
2 Turn the zoom wheel to select the desired
length setting (Fig. 6).
Note: When you trim for the first time, start at
the highest length setting to familiarise yourself
with the appliance.
3 Switch on the appliance.
4 To trim most effectively, move the appliance
against the hair growth direction. Make sure that
the surface of the comb always stays in contact
with the skin (Fig. 15).
Cleaning and maintenance
Cleaning the appliance
Note: Only the cutting element and the comb can
be cleaned with water.
We advise you to empty the hair-collection
chamber after each trimming session. When you
trim long, dense beards, it may also be necessary
to empty the hair-collection chamber during the
trimming session in order to maintain optimal
suction performance.
1
Switch off the appliance and disconnect it from
the power outlet.
2 Wipe the housing of the appliance with a dry
cloth.
3 Remove the comb (Fig. 16) and clean it with the
cleaning brush and/or rinse it under the tap
(Fig. 17).
4 Remove the cutting element and clean it under
the tap (Fig. 18). Shake off excess water and
leave to dry completely.
Caution: Never dry the cutting element with a towel
or tissue, as this may damage the trimming teeth.
5 Shake and/or brush out the hairs that have
collected in the hair chamber (Fig. 19, Fig. 20).
6 After cleaning, reattach the cutting element
(Fig. 21) and comb (Fig. 14) to the appliance.
Disposal
This appliance contains a rechargeable battery which
must be disposed of properly. Contact your local
town or city officials for battery disposal information.
You can also call 1-800-8-BATTERY or visit
www.rbrc.com for battery drop-off locations (Fig. 22).
For assistance, visit our website www.philips.com/
support or call 1-800-243-3050 toll free.
Guarantee and support
If you need information or support, please
www.philips.com/support or call toll free:
1-866-800-9311. To locate the nearest Philips
warranty depot, visit our website www.philips.com.
Guarantee restrictions
-
Philips Consumer Lifestyle guarantees its
products for a period of two years after the date
of purchase. If any defect due to faulty materials
and workmanship occurs within this two-year
guarantee period, Philips Consumer Lifestyle will
repair or replace the product at its expense.
-
Philips Consumer Lifestyle will only pay for
repair or replacement if convincing proof is
provided, for instance by means of a receipt,
that the day on which service is claimed is
within the guarantee period. Parts that are
subject to wear (such as cutting units and
shaving heads) are not covered by the terms of
the international guarantee.
-
The guarantee is not valid if a defect is due
to damage caused by incorrect use, poor
maintenance (e.g. parts blocked by scale)
or if alterations or repairs have been carried out
by persons not authorised by Philips Consumer
Lifestyle.
-
For the appliance to be used correctly,
the user should strictly adhere to all instructions
included in the user manual and should abstain
from any actions or uses that are described as
undesired or which are warned against in the
user manual.
-
These guarantee restrictions do not affect your
statutory rights.
FRANÇAIS (CANADA)
Description générale (Fig. 1)
1
Bloc tondeuse
2 Système d'aspiration
3 Paramètres de longueur
4 Molette de verrouillage
5 Bouton marche/arrêt
6 Témoin d'état de la batterie
7 Éponge de nettoyage
8 Brosse de nettoyage
9 Petite fiche
10 Bloc d'alimentation (adaptateur)
11 Taille-favoris de précision
12 Sabot pour barbe et barbe de 3 jours
Remarque : Les accessoires fournis peuvent varier
selon les différents produits. Les accessoires qui
ont été fournis avec votre appareil sont indiqués
sur l'emballage.
Renseignements importants sur la
sécurité
Lisez attentivement ces informations importantes
avant d'utiliser l'appareil et ses accessoires
et conservez-les pour un usage ultérieur. Les
accessoires fournis peuvent varier selon les
différents produits.
Danger
- Gardez le bloc d'alimentation
au sec (fig. 2).
Avertissement
- Le bloc d'alimentation contient
un transformateur. Pour
éviter tout risque d'accident,
ne coupez pas la fiche du
bloc d'alimentation pour la
remplacer par une autre.
- Utilisez exclusivement le bloc
d'alimentation (HQ8505)
fourni pour charger l'appareil.
- Cet appareil ne doit pas être
utilisé par des personnes
(incluant des enfants) avec
des capacités physiques,
sensorielles ou mentales
réduites, ou qui n'ont
pas l'expérience et les
connaissances nécessaires,
à moins qu'elles ne soient
sous la surveillance d'une
personne responsable de
leur sécurité ou qu'elles
aient reçu de cette personne
des directives concernant
l'utilisation de l'appareil.

Advertisement

loading